Stainless Steel Shim

Precut 300 Series
The best way to solve alignment and levelling problems on motors, pumps, generators and other plant machinery! The pre-cut shims are safer and easier to position as the tab eliminates the need to place hands under machinery during installation or removal of the shim. Engineered for quality, all shim thickness tolerances meet industry standards and conform to standard bolt and stud sizes. Each shim is clearly marked with its thickness.

Clamp Fixture Components

Material: Medium Carbon Steel. Hardness: HRC32-38. Surface Finish: Manganese Phosphate

CC06 - Tapped End Plain Clamp

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Perfo Storage Accessories

The accessories are quickly secured to our Perfo panels with our Perfolock and may be repositioned at any time. All items are manufactured from steel and are zinc plated to give a long, corrosion-resistant life. The standard kits provide easy selection and ordering for Perfo accessories. For custom layouts choose from our range of Perfo accessories. Securely fastened to panels in seconds with Perfolock clips. Remove or reposition as required. Hook ends capped for safety.

Single Tool Hooks (Pack of 5)

Matlock Industrial Cupboards and Lockers

Matlock industrial steel storage cupboards provide strong secure storage. All cupboard components are manufactured from mild steel with an attractive paint finish. The loading capacity for each shelf is a maximum of 85kg UDL*.


*Uniformly Distributed Load.

Cupboard/Wardrobe

Complete with two adjustable shelves, extra shelves available on request. Fitted with a dished top to help retain tools and small items. Available in silver/blue, green, red, silver, white or yellow.

Dimensions (H x W x D): 890 x 460 x 460mm.

Additional shelf is available on Order Code: MTL-405-6440D


Cupboard housing is painted silver.
Available with the following door colours: blue, green, red, silver, white or yellow*.

Please refer to the PDF of the catalogue for Order Codes.

*Other colours available on request.

Plain Bearing Chucks

Designed for medium or heavy duty portable, bench or floor mounted power tools. Industrial quality with fully hardened and ground working components which offers high accuracy, gripping power and durability. Each chuck has centre ground jaws for absolute straightness and alignment, through hardened sleeve teeth plus hardened nose and keyholes to provide wear resistance. The one piece sleeve eliminates crack between the driving teeth.

Atlas? Workholding Toggle Clamps

Atlas? Workholding's push pull toggle clamps have a straight-line action that allow these plunger-style clamps to exert extremely high loading capacities whilst maintaining compactness.

The clamps will also lock in the open position, which allows a 'pull' to be exerted for example, in use with foam moulds. All models have tapped spindles for use with adjustable spindles.

The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Push Pull Industrial Toggle Clamps

Atlas? Workholding AP136 Push Pull Type Industrial Toggle Clamp.

Capacities:
Holding capacity: 136Kg.
Spindle thread: M8
Handle Movement: 180.
Handle position: 45 extended.
Flat flanged base.
Weight: 285g

For all dimensional specifications please refer to our catalogue.

Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Open Bay Euro Shelving

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 28-32. Surface Finish: Manganese Phosphate.

FC07 - Engineers Stud