Document Workstations

Perfect for supervisory or general workshop use, these units combine secure storage with a sloping worksurface. All steel construction with epoxy powder coated grey/blue finish with reinforced, lockable doors, two adjustable shelves, two internal drawers and a sloping writing surface.

Quality Station

Basic workstation complete with drywipe/magnetic rear surface and 10 file holder.

Matlock™ Industrial Racking and Shelving

Matlock™ QuickRack industrial racking and shelving is a flexible, simple and cost effective solution to your storage problems. Assembly of the shelving couldn't be simpler, simply slot and tap the frame work together as there are no fiddly nuts and bolts. Each shelving bay is supplied with 18mm thick shelves, extra shelves are available on request, allowing you to design shelving bays to suit your specific space/storage requirements.

QuickRack Heavy Duty Shelving Bay 1980x1800x900 (HxWxD)

Matlock™ QuickRack industrial heavy duty racking and shelving is ideal for medium to heavy weight storage of tools and components.

Contents: 4 uprights. 3 shelf levels with channel shelf support beams. Support feet and assembly instructions.
Maximum load per shelf: 210Kg.

Steel Lockers

Steel lockers with a vibrant Design and choice of colour to suit any environment. Each compartment has air vents that allows each compartment to breathe. 10 disc secure locking system supplied with two keys as standard giving a high level of security. All doors are manufactured from 0.9mm steel and to add further strength and rigidity a steel channel is welded into the inside of every door and each compartment. Lockers are supplied in a quality cardboard box to ensure they arrive to you in pristine condition.

Kennedy® Industrial Drill Chuck Arbors

Precision machined, fully hardened & ground to give maximum surface contact.

Morse Taper Drive to Jacobs Taper

Kennedy® Interchangeable Points

A complete range of interchangeable points to complement the revolving centre sets.

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

Engineers Workbenches

The frame mounts securely to the bench leg of any static bench on this page. Backpanel is available in 3 types:
perforated, louvred or combi.
1115mm high (above worktop).
Twin tube 240v light.
200mm deep shelf.
457mm high steel panel.

Overhead kit

Clamp Fixture Components

Material: Medium Carbon Steel. Hardness: HRC32-38. Surface Finish: Manganese Phosphate

CC05 - Plain U-Clamp

Precision Brand Steel Shims

All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.

12 Piece Assorted Pack - Inch Sizes

Contains one of each of the following thickness of shim:
0.001”, 0.0015”, 0.002”, 0.003”, 0.004”, 0.005”, 0.006”, 0.007”, 0.008”, 0.010”, 0.012” and 0.015”.
Size (W x L): 6" x 12".