Lathe Chuck Jaws

For self-centring lathe chucks (IND-475) - Indexa 3200 and 3500. Chuck jaws supplied in sets of 3.

Hard Jaws

Outside

Circular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build. Supplied with: Brass and steel top plates. Removable hexagon key handles ensure ease of operation through a 180 arc. All chucks are supplied with clamps, side and end stops.



Fine pole. Pole spacing: 1.5mm steel / 0.5mm brass. Force: 80N/cm2

Window Door Cupboard - With Shelves

Window doors allow immediate identification of cupboard contents. 100kgs UDL capacity per shelf. Shelves adjustable on a 25mm pitch. Fully lockable.
Dimensions(W x D x H): 1300 or 1050 x 650 x 2000mm.

Fixture Components

Material: Medium Carbon Steel EN19B. Hardness: HRC 32 - 38

FC31 - Ground Dowel Bolts

Tilt Boxes

The tilt box system is based on a range of clip together plastic housings, which contain transparent small parts boxes with a forward tilt action to give access. Tilt box storage is useful in all environments including office, retail and manufacturing providing highly visible, dense and dust protective storage for most small components. Choose the individual models, or the mixed kit of the 9/6/5/4 compartment versions.
All models are 600mm wide.

High Precision Toolmakers Vices

Squareness and parallelism to within 0.003mm
Designed for precision grinding and many other tool room applications.

V-Groove Jaw

Industrial Key Steel

Key Steel Stainless Steel

Key Steel Stainless Steel - Metric

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Cantilever bench

Perfect for assembly applications, the cantilever frame comes complete with a 20mm worktop in either multiplex or mfc.
Full range of accessories available, including overhead kits
and suspended cabinets. Flat packed for self assembly.
Height: 780mm.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Revolving Centres

Manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece.

Type 604 H

Hardened and ground body.