Grinding Machine Guards

The three types of guard all comply with the Abrasive Wheels Regulations, the Protection of Eye Regulations 1974 and have been tested to BS 2092 Grade 1. The visor is manufactured from polycarbonate. The frames for the 130003 and 130005 guards are moulded reinforced nylon and the 130007 are manufactured from aluminium.

Fixture Components

Material: Body - Medium Carbon Steel EN198. Ball - Through Hardened Steel EN 31. Hardness: Body - HRC 32 - 38. Ball - HRC 62. Surface Finish: Ball - Hardened and Ground

FC16 - Clamp Set Screw

Dog Point

Probe Industrial Cupboards

All cupboard components are manufactured from mild steel. Shelf loading is a maximum of 85kg UDL. This 12 compartment cupboard features two partitions with nine adjustable shelves. Available in silver/blue, green, red, silver, white or yellow (other colours available on request).

12 Compartment Cupboard

Dimensions (H x W x D): 1780 x 915 x 460mm.
N.B. illustrated in silver/green.

Modular Coolant Hose System

Circle Flow System

Rectangular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build.
Supplied with:
Brass and steel top plates.
Removable hexagon key handles ensure ease of operation through a 180 arc.
All chucks are supplied with clamps, side and end stops.



These chucks are primarily designed for grinding operations. They will effectively clamp all workpiece thicknesses down to 3mm.
Standard Pole.
Pole spacing: 4.0mm steel / 2mm brass.
Force: 80N/cm2.

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Senator® Drill Press Vices

Suitable for use on pillar/bench drills to steady the workpiece in all light duty drilling applications for the garage or small workshop. Cast construction with machined slots which are spaced to fit all popular drill stand bases. Cross drilled handle with sliding T-bar for extra leverage. 2 sizes available with maximum jaw widths of 75mm and 100mm.

100mm Workshop Drill Press Vice

Steel Locker

Hat shelf and 2 x coat hooks fitted in the single door locker (450mm deep locker also has a hanging rail), 2 x coat hooks fitted in each compartment of the 2-tier locker. BSI Quality Assured (meet the requirements of British Standard for Clothes Lockers BS4680:1996 ?Standard Duty?).

Picture for illustration only not accurate for colour.

Matlock™ Industrial Racking and Shelving

Matlock™ QuickRack industrial racking and shelving is a flexible, simple and cost effective solution to your storage problems. Assembly of the shelving couldn't be simpler, simply slot and tap the frame work together as there are no fiddly nuts and bolts. Each shelving bay is supplied with 18mm thick shelves, extra shelves are available on request, allowing you to design shelving bays to suit your specific space/storage requirements.

QuickRack Heavy Duty Shelving Bay 1980x1500x600mm (HxWxD)

Matlock™ QuickRack industrial heavy duty racking and shelving is ideal for medium to heavy weight storage of tools and components.

Contents: 4 uprights. 3 shelf levels with channel shelf support beams. Support feet and assembly instructions.
Maximum load per shelf: 275Kg

Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 32-38. Surface Finish: Manganese Phosphate.

FC06 - T-Slot Nut (Milled)