Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Lathe Chuck Jaws

For self-centring lathe chucks (IND-475) - Indexa 3200 and 3500. Chuck jaws supplied in sets of 3.

Hard Jaws

Outside

Woodcraft Vice

A light duty low cost equivalent to the woodworking vice. Cast grey iron body and front plate, with steel handle main screw and slide rods. The V150 vice is a portable version, which can be clamped to any convenient surface.

High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.

Industrial Stainless Steel - Metric Key SteelStainless Steel - Metric

Kennedy® Portable Bench Accessories

Replacement rubber feet (Pk 4) for portable bench & vice.

Clamp Fixture Components

Material: Medium Carbon Steel. Hardness: HRC32-38. Surface Finish: Manganese Phosphate

CC02 - Bore Clamp

Steel Locker

Hat shelf and 2 x coat hooks fitted in the single door locker (450mm deep locker also has a hanging rail), 2 x coat hooks fitted in each compartment of the 2-tier locker. BSI Quality Assured (meet the requirements of British Standard for Clothes Lockers BS4680:1996 ?Standard Duty?).

Picture for illustration only not accurate for colour.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

Stainless Steel Shim

Precut 300 Series
The best way to solve alignment and levelling problems on motors, pumps, generators and other plant machinery! The pre-cut shims are safer and easier to position as the tab eliminates the need to place hands under machinery during installation or removal of the shim. Engineered for quality, all shim thickness tolerances meet industry standards and conform to standard bolt and stud sizes. Each shim is clearly marked with its thickness.

Kennedy® Serrated Soft Jaws

To suit inch serrated power chucks (Berg, Forkardt, Rohm, Pratt Burnard, SMW and Autoblok etc).

3 Jaw Sets