产品 / 工装夹具
编号：BOT4061902C
●产品描述：
CNC Tool-Rack Storage System
Available in single and double sided units. A flexible design which allows the free standing starter units to have add-on bays on the side to create longer runs wherever necessary.
All units must be firmly fixed to the floor.
Single sided - dimensions: 1835 x 1015 x 555mm
编号：PCN4155590J
●产品描述：
Stainless Steel Shim
Precut 300 Series
The best way to solve alignment and levelling problems on motors, pumps, generators and other plant machinery! The pre-cut shims are safer and easier to position as the tab eliminates the need to place hands under machinery during installation or removal of the shim. Engineered for quality, all shim thickness tolerances meet industry standards and conform to standard bolt and stud sizes. Each shim is clearly marked with its thickness.
编号：LLN2592100A
●产品描述：
Deep Hole Air Gun
A plastic probe jets high pressure air into the hole to dislodge chips from blind holes up to 450mm deep. Shrouded nozzle prevents particles escaping and causing injury. 1/4” BSP male air inlet. 32mm ID bore conveying hose. Complete with dust bag.
编号：KEN4429550K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
Morse Taper Drive to Jacobs Taper
编号：KEN4824430K
●产品描述：
Kennedy® Morse Taper Tooling
A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.
Extension Sockets
编号：IND4450400K
●产品描述：
High Precision Toolmakers Vices
Squareness and parallelism to within 0.003mm
Designed for precision grinding and many other tool room applications.
V-Groove Jaw
编号：KEN4210850K
●产品描述：
Kennedy® Industrial Key Steel
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.
Rectangular - Metric
编号：KEN4826120K
●产品描述：
Kennedy® Morse Taper Tooling
A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.
Turret Sockets
编号：IND4459210K
●产品描述：
Indexa Industrial Lathe Carriers
Available with straight or bent tail. Manufactured from high grade, malleable Cast Iron with high tensile strength. Smooth action square head clamping screw.
Bent Type
编号：IND4601002C
●产品描述：
Indexa Die Springs
The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.
Extra Heavy-Load Springs Colour Coded Yellow