Mechanics' Vices

Close grained cast grey iron body and sliding jaw which are machined on all friction surfaces for a smooth action. Fitted with steel handle and main screw.

Steel Locker

Hat shelf and 2 x coat hooks fitted in the single door locker (450mm deep locker also has a hanging rail), 2 x coat hooks fitted in each compartment of the 2-tier locker. BSI Quality Assured (meet the requirements of British Standard for Clothes Lockers BS4680:1996 ?Standard Duty?).

Picture for illustration only not accurate for colour.

Framework Benches

Simple and economic solutions to the need of production assembly, maintenance and despatch personnel.
18mm FSC compliant chipboard working surface (210kg UDL). Shelves on workstations carry 150kg UDL.
Robust uprights and light grey beam finish. Kits supplied with metal feet and full assembly instructions.

Modular Coolant Hose System



Junction Pieces

Y-Redycer, Adaptor

Clamp Fixture Components

Material: Cast Iron. BS. 1452 Gr. 250.

BC02 - Square Hollow Block

Mill Guards

Steel tubular frame and 5mm thick polycarbonate visors for heavy duty applications. Complies with BS EN 292 : 1993 and BS 5304 : 1988.

Enclosure

Quick release plunger pin allows each section to swing aside for instant access. Can be installed on any make of milling machine. Supplied with T-slot and bolts. Model EM/1 has 1 hinged side and front panel, right hand opening as standard (if left hand is required please state when ordering). Models EM/2 and EM/3 have two equal size panels.

Kennedy® Morse Taper Tooling

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.

Turret Sockets

Kennedy® Spiro-Rapid Clamping Industrial Keyless Drill Chucks

Allows quick tool change, while maintaining high precision and high concentricity. Fully hardened jaws, sleeve and retaining ring for durability and wear resistance. Self tightening.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 35. Surface Finish: Manganese Phosphate.

FC04 - Flanged Nut