Plain Bearing Chucks

Designed for medium or heavy duty portable, bench or floor mounted power tools. Industrial quality with fully hardened and ground working components which offers high accuracy, gripping power and durability. Each chuck has centre ground jaws for absolute straightness and alignment, through hardened sleeve teeth plus hardened nose and keyholes to provide wear resistance. The one piece sleeve eliminates crack between the driving teeth.

Heavy Duty Weldable Toggle Clamps

Hold down action suitable for high production automotive type applications. Heavy duty forged components with hardened and ground pivot points. The users provide their own handle and bar and weld them to the clamp which is then welded to a base. These flexible mounting clamps allows them to be used in situations where standard clamps are not effective.

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Metric round sizes

Tolerances:
Up to 25mm plus 0 - 0.012mm.
Over 25mm up to and including 50mm plus 0 - 0.0250mm.

Perfo Storage Accessories

The accessories are quickly secured to our Perfo panels with our Perfolock and may be repositioned at any time. All items are manufactured from steel and are zinc plated to give a long, corrosion-resistant life. The standard kits provide easy selection and ordering for Perfo accessories. For custom layouts choose from our range of Perfo accessories. Securely fastened to panels in seconds with Perfolock clips. Remove or reposition as required. Hook ends capped for safety.

Pipe/Tube Holders (Pack of 2)

Mobile Cabinets

A range of engineers trolleys for storage on the move. Metal top tray with 3 raised edges and inlaid mat. Central locking and full depth push and pull handle. Each drawer has a safety trigger to prevent accidental opening. All units are 550mm deep and 925mm high. Available in 750 or 1000mm widths.
Each unit has 125mm diameter castors (2 with brake).

1000mm wide Mobile Cabinet

2x 75mm, 3x 125mm and 1x 175mm drawers

Precision Brand Stainless Steel Shims

Full hard, cold rolled, Type 302.
Rockwell hardness: C40 - 45.
Meets SAE 30302; AISI-T302; ASTM A-666 Ultimate.

Tensile strength: 185,000psi min.

Stainless Steel Shims - Metric Sizes

Precision Brand Stainless Steel Shims

Full hard, cold rolled, Type 302.
Rockwell hardness: C40 - 45.
Meets SAE 30302; AISI-T302; ASTM A-666 Ultimate.

Tensile strength: 185,000psi min.

8 Piece Assorted Pack - Metric Sizes

Contains one of each of the following thickness of shim:
0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40 and 0.50mm.
Size (W x L): 150mm x 1.25m

Bott Perfo Tool Panels

Perfo products are designed to make optimum use of workshop space and are manufactured to withstand the most rigorous conditions, giving a long service life. The fully flanged metal panels are reinforced with channel backstrips and strengthened fixing points. All hooks lock into the panel with the Perfo locking clip, ensuring that hooks can be positioned quickly but remain securely located.
Panels are supplied individually.

Single Tool Panels

Drawer Cabinets

Robust freestanding storage cabinets available in 2 widths. Can also be used as slide under pedestals for workbenches.
? Tough welded steel construction
? Finished in epoxy powder coat gre/blue
? 60kg load capacity per drawer
? All units are 500mm deep x 800mm high
? Fully lockable

500mm wide Drawer Cabinet

1x 700mm cupboard

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow