Framework Benches

Simple and economic solutions to the need of production assembly, maintenance and despatch personnel.
18mm FSC compliant chipboard working surface (210kg UDL). Shelves on workstations carry 150kg UDL.
Robust uprights and light grey beam finish. Kits supplied with metal feet and full assembly instructions.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Steel Locker

Hat shelf and 2 x coat hooks fitted in the single door locker (450mm deep locker also has a hanging rail), 2 x coat hooks fitted in each compartment of the 2-tier locker. BSI Quality Assured (meet the requirements of British Standard for Clothes Lockers BS4680:1996 ?Standard Duty?).

Picture for illustration only not accurate for colour.

Modular Coolant Hose System

Nozzles

Pointed

1/4" Bore

Matlock Industrial Cupboards and Lockers

Combining robust design with a heavy gauge "double skin" door to guard against leverage and impact, these lockers are hard to beat when it comes to long-lasting security. Supplied with key operated deadlock and 2 keys as standard.

Picture illustrates door combination only, for door colour refer to description.

Heavy Duty Steel Lockers

Double Width Cupboards

With the same features as the single width models,
but with extra storage capacity.

Carver Rack Clamps

Consist of a J shape notched bar and sliding jaw. Finished in a bright orange epoxy coating for durability. Uses include metal fabrication, welding, moulding box and die holding, pattern making, plastic and fibreglass moulding & plate fabrication. No long screws to bend, or critical working parts exposed to weld spatter. The action of tightening the clamps does not impose rotation to the workpiece. The jaws may be reversed and the clamp used in reverse action.

Standard Duty Clamp

For all dimensional specifications please refer to our catalogue.

Kennedy® Morse Taper Tooling

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.

Turret Sockets

Kennedy® Morse Taper Tooling

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.

Drill Sleeves