Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Workstand

Space saving work units available as mobile or static. Base shelf can be inverted to create an anti-roll off upstand. The 30mm worktop is available in multiplex or wisa.
Dimensions: 600 x 600 x 780mm high

Matlock™ Parts, Component and Tool Storage Bins

These high strength polypropylene Euro boxes have reinforced corners and rims with integral interlocking hinged lids; that can not become separated from the container and inhibits theft when fitted with tamper-evident seals, they improve access and safety when transporting heavy loads.

The smooth flat base allows silent movement on conveyors making Matlock® Euro boxes suitable for use in distribution centres or warehouse storage and when they are not in use, the bins can be nested so that they take up 70% less space, ideal when being returned on transport.

All Matlock® Euro containers feature Ergonomic hand grips for safer manual handling and can be sealed using security tags.

Available in 20Ltr, 40Ltr or 54Ltr capacities in a choice of two colours Blue or Grey.

Euro Storage Bin

20Ltr
External size: 400 x 300 x 260mm
Internal size: 350 x 270 x 240mm
Weight: 1.75kgs

40Ltr
External size: 600 x 400 x 250mm
Internal size: 565 x 370 x 230mm
Weight 3.0kgs

54Ltr
External size: 600 x 400 x 335mm
Internal size: 550 x 365 x 315mm
Weight: 2.80kgs

Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 28-32

FC09 - Swing Bolt

Brass Shim

Precision Brand’s Brass Shim Stock is a half hard, cold rolled, CDA 260 alloy.
Rockwell hardness: 30T 56 - 68.
Meets SAE-CA-260, CDA 260, ASTM B-19 & B-36.
Tensile strength: 57 - 67,000psi.
Elongation: 18 to 42% in 2”.
Size: 6” x 100”.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

Kennedy® Industrial Drill Chuck Arbors

Precision machined, fully hardened & ground to give maximum surface contact.

Morse Taper Drive to Threaded

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Metric round sizes

Tolerances:
Up to 25mm plus 0 - 0.012mm.
Over 25mm up to and including 50mm plus 0 - 0.0250mm.

Kitted Cupboards

All models 1000mm wide x 550 deep. Tough, welded construction, lockable, reinforced doors, galvanised steel shelves and roller bearing drawers all with 50kg UDL capacity. Mpx wooden worktops for enclosed mini-workshops, internal panels in perfo and louvre styles. Optional hook, bin and divider kits. RAL5010 blue/RAL7035 grey powdercoat finish.



Drawers: 1x 75mm, 1x 125mm, 1x 175mm.
Shelves: 1.

Precision Brand Steel Shims

All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.

Steel Shims - Inch Sizes

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.