Kitted Cupboard

Tough, welded construction with lockable, reinforced doors, galvanised steel shelves and roller bearing drawers all with 50kg UDL capacity. RAL5010 blue/RAL7035 grey powdercoat finish



Drawers: 1x 75mm, 1x 125mm.
Shelves: 1.

Kennedy® Serrated Soft Jaws

To suit metric serrated power chucks (Kitagawa, Howa, Matsumoto, Pratt Burnard, SMW and Autoblok etc).

3 Jaw Sets

Carver Rack Clamps

Consist of a J shape notched bar and sliding jaw. Finished in a bright orange epoxy coating for durability. Uses include metal fabrication, welding, moulding box and die holding, pattern making, plastic and fibreglass moulding & plate fabrication. No long screws to bend, or critical working parts exposed to weld spatter. The action of tightening the clamps does not impose rotation to the workpiece. The jaws may be reversed and the clamp used in reverse action.

Medium Duty Clamp

For all dimensional specifications please refer to our catalogue.

Steel Locker

Hat shelf and 2 x coat hooks fitted in the single door locker (450mm deep locker also has a hanging rail), 2 x coat hooks fitted in each compartment of the 2-tier locker. BSI Quality Assured (meet the requirements of British Standard for Clothes Lockers BS4680:1996 ?Standard Duty?).

Picture for illustration only not accurate for colour.

EURO CONTAINERS

Practical Euro boxes, ideal for use wherever hygienic stackable plastic containers play an important role in transport and storage. Resistant to acids and alkaline solutions, cold and heat. Optimal handling due to ergonomic handles also suitable for conveyor systems.
Available in five sizes:
400x300x170mm
400x300x220mm
600x400x170mm
600x400x220mm
600x400x320mm

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Inch round sizes

Tolerances:
Below 1" plus/minus 0.00025".
1" up to and including 2" plus/minus 0.00050".

For drawers 800 x 750mm (W x D)

41 Compartment

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Ball Bearing Super Chuck

Designed for extra heavy duty drill applications such as industrial drilling machines, jig borers, milling machines, lathes, radials and CNC/NC machining centres. Each chuck features ball bearing construction to maximise the gripping force and accuracy, through hardened sleeve teeth plus hardened nose and keyholes to provide wear resistance. The centre ground jaws are specially heat treated to ensure high gripping surface hardness.