Matlock™ Acid & Alkali Storage Cabinets

Welded construction from 0.9mm steel.
Zintec coated for extra corrosive resistance.
Rebated doors.
Secured by chrome 3-way locking handle.
75kg (UDL) adjustable shelves.
High visibility powder coated white RAL 9003.
Compliant with: COSHH - 1994.

Acid & Alkali Storage Cabinets

Atlas? Workholding Toggle Clamps

Atlas? Workholding's comprehensive range of fixed grip toggle clamps are suitable for many applications including clamping loads, holding components in jigs and fixtures and many more. Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Low profile clamps suitable for use in general applications requiring increased access to the actual work piece.

Force applied downwards 90 to bar.

Horizontal Industrial Toggle Clamps

Atlas? Workholding AH80-FA Horizontal Industrial Toggle Clamp.

Capacities:
Holding capacity: 80kg
Movement: handle: 60. bar: 85.
Adjustable ''U'' bar type.
Tipped spindle M6.
Flat flanged base.
Weight: 130g

For all dimensional specifications please refer to our catalogue.

Matlock Industrial Cupboards and Lockers

The Matlock garment dispenser lockers have a single service door provides access to all the inner compartments of these garment dispensers enabling the distribution of clean garments, towels, etc. Individual compartments remain secure and require keyed access.

Garment Dispenser Locker

Precision Ground Flat Stock (1000mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Kennedy® Morse Taper Tooling

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.

Turret Sockets

Modular Coolant Hose System



Junction Reducers

Y-Redycer, Adaptor

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Modular Coolant Hose System

3/4" Bore

Junction Reducers

Carver Bar Clamp Spare Jaws

Supplied as singles. Available for T186, T257, T285, T290 and T321.

Clamp Jaw (Single)

For all dimensional specifications please refer to our catalogue.

Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Clad Bay Euro Shelving