Independent Jaw Lathe Chucks

4 jaw, independent chuck with manual gripping, and a high quality cast iron body (160mm is steel body). 4 jaws ensure the precise centering of square-shaped workpieces with the maximum permitted gripping force. Chuck with diameters 250mm and above are equipped with additional T/slots, permitting the addition of extra jaws. Mounted directly to CAMLOCK type machine-tool spindles. DIN 55029.

Taper Mount 4 Jaw Type Chuck Short Taper 1 : 4 Type 4344

Self-Centring Geared Scroll Lathe Chucks

Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws - internal and external stepped.

Type 3204 Cast Iron 3 Jaw Plain Back Chuck

Rear mounting. DIN 6350 (form A). 3 Jaw. Plain back with adaptor recess.

Self-Centring Geared Scroll Lathe Chucks

Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws - internal and external stepped.

Type 3204 Cast Iron 3 Jaw Plain Back Chuck

Rear mounting. DIN 6350 (form A). 3 Jaw. Plain back with adaptor recess.

Self-Centring Geared Scroll Lathe Chucks

Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws - internal and external stepped.

Type 3504 Steel 3 Jaw Plain Back Chuck

Rear mounting. DIN 6350 (form A). 3 jaw plain back with adaptor recess.

Self-Centring Geared Scroll Lathe Chucks

Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws - internal and external stepped.

Type 3244 Cast Iron Taper Mount Type Chucks - Short Taper 1 : 4

Camlock mounted on a short taper (1 : 4). DIN 55029, DIN 55022 & ASA B.5.9. 3 jaw plain back with adaptor recess.

Lathe Chuck Jaws

For self-centring lathe chucks (IND-475) - Indexa 3200 and 3500. Chuck jaws supplied in sets of 3.

Hard Jaws

Inside

Independent Jaw Lathe Chucks

4 jaw, independent chuck with manual gripping, and a high quality cast iron body (160mm is steel body). 4 jaws ensure the precise centering of square-shaped workpieces with the maximum permitted gripping force. Chuck with diameters 250mm and above are equipped with additional T/slots, permitting the addition of extra jaws. Mounted directly to CAMLOCK type machine-tool spindles. DIN 55029.

Taper Mount 4 Jaw Type Chuck Short Taper 1 : 4 Type 4344

Self-Centring Geared Scroll Lathe Chucks

Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws - internal and external stepped.

Type 3274 Cast Iron 3 Jaw Plain Back Chuck

Front mounting. DIN 6350 (form A). 3 Jaw. Plain back with adaptor recess.

Self-Centring Geared Scroll Lathe Chucks

Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws - internal and external stepped.

Type 3274 Cast Iron 3 Jaw Plain Back Chuck

Front mounting. DIN 6350 (form A). 3 Jaw. Plain back with adaptor recess.

Independent Jaw Lathe Chucks

Independently adjustable jaws. This allows firm gripping of irregular shaped work and the 4 jaws allow a square component to be perfectly centred to the chuck while achieving maximum gripping force. The chuck bodies are made of steel (sizes 85 - 160mm) or high quality cast iron (sizes 200-800mm). The jaws are made of high quality carbon steel and hardened. Thrust bearings and operating screws are made of case hardened steel. Supplied with reversible solid jaws, internal and external stepped. With T-Slots.

Cast Iron 4 Jaw Plain Back Chuck Type 4304

Plain back with adaptor recess. Front mounted. DIN 6351.