产品 / 工装夹具
编号：IND4433090K
●产品描述：
Push Pull Industrial Toggle Clamps
The straight line action which gives these plunger-style clamps extremely high loading capacities whilst maintaining compactness. These clamps also lock in the open position which allows a 'pull' to be exerted (for instance, in use with foam moulds). All models have tapped spindles for use with adjustable spindles.
Base Mounted Type (Flanged)
45 Handle
编号：IND4433100K
●产品描述：
Push Pull Industrial Toggle Clamps
The straight line action which gives these plunger-style clamps extremely high loading capacities whilst maintaining compactness. These clamps also lock in the open position which allows a 'pull' to be exerted (for instance, in use with foam moulds). All models have tapped spindles for use with adjustable spindles.
Base Mounted Type (Flanged)
45 Handle
编号：IND4438560K
●产品描述：
Toggle Clamp Spares
As Neoprene capped but suitable for clamping onto irregular shapes or angled workpieces.
Swivel Foot Spindles
编号：IND4431770K
●产品描述：
Vertical Industrial Toggle Clamps
Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production. Clamping Capacity - the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.
'U' Bar (Adjustable) Type
Straight Base
编号：IND4432420K
●产品描述：
Horizontal Industrial Toggle Clamps
With a low profile design suitable for use in applications requiring increased access to the actual workpiece. Available in 8 sizes for general application in areas where a lower profile is required. Force applied downwards 90 to bar.
'U' Bar (Adjustable) Type
Tipped Spindle
编号：IND4438000K
●产品描述：
Latch Plate
For use with latch type toggle clamps.
编号：IND4251050H
●产品描述：
Clamp Fixture Components
Material: Medium Carbon Steel. Hardness: hrc38. Surface Finish: Manganese Phosphate. Jaws: Surface treated with high frequency quenching.
CC12 - Adjustable Clamp
编号：IND4253050F
●产品描述：
Support Fixture Components
Material: Medium Carbon Steel. Hardness: HRC 38. Surface Finish: Manganese Phosphate
SC10 - Extension Pillar
编号：IND4252205S
●产品描述：
Fixture Components
Material: Medium Carbon Steel. Hardness: HRC 28-32. Surface Finish: Manganese Phosphate.
FC07 - Engineers Stud
编号：IND4252830N
●产品描述：
Fixture Components
Material: Medium Carbon Steel EN19B. Hardness: HRC 32 - 38. Serrated Surface: Induction Hardened.Surface Finish: Manganese Phosphate.
FC19 - Grip Head Screw