Murex Acetylene Welding Mixer

For use with No.5 shank and welding nozzles.

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Murex Mig Spares

For torch compatibility please refer to our catalogue.

Contact Tips

Murex Mig Spares

For torch compatibility please refer to our catalogue.

Contact Tips

Saffire Regulators

With twin bulk head gauges clearly displaying cylinder pressure and flow rate. Comply with EN ISO 2503.
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.

Series 2 Multi-Stage Regulators

Twin-chambered to deliver constant pressure - even when cylinder is near empty. Citogas Regulators
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Red Acetylene Hose

Fitted hoses. Kink and crush resistant. 6.3mm for general use, 10mm for heavy duty use.

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. Including 1144, 1143, 2010, Saffire 5, 4, 3, NM250, NM400, Citogas HDT200, NMC200. Size 13 suitable for Saffire 4 and 3 only.

Available in 13mm (126809) and 19mm (126810).

A-GNM Gouging Nozzles