Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Saffire Regulators

With twin bulk head gauges clearly displaying cylinder pressure and flow rate. Comply with EN ISO 2503.
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.
ArC-35L Argon type is suitable for inert gases eg for use with Mig or Tig welders.

Series 1 Single Stage

Saffire NM250 Cutting Blowpipe

For general workshop cutting up to 250mm (10?). For use with ANM/PNM nozzles below. Nozzle mixing and backfire resistant, 90 head with improved control knobs for positive flame setting.

Murex Masterpak Oxy-Acetylene Welding & Cutting Kits

Murex Masterpak cutting and welding kits - one for oxy-propane cutting, one for oxy-acetylene cutting and one combined oxy-acetylene welding/cutting pack. The kits are ideal for construction workers and civil engineers looking for a complete outfit for all maintenance, repair and demolition work. For complete oxy-acetylene welding and cutting capability. If welding capability is not required, users may specify either the oxy-propane cutting kit or the oxy-acetylene version. Again, both these Masterpaks include the renowned Saffire NM 250 Cutter, regulators and flashback arrestors with their inherent levels of safety and performance.

Oxy-Acetylene Welding & Cutting Kit (1300006)

Kit contents:
Saffire 5 shank,
mixer and cutting attachment,
oxygen and acetylene 2 gauge Saffire series 1ec regulators,
XL5 flashback arrestors,
premium 10m x 6.3mm factory fitted with HCV,
swaged nozzles 2,5,10 ANM 1/16 cutting nozzle,
combination spanner and spark lighter.

Murex Saffire DH3 Lightweight Shank and Attachment

Shank
Dual purpose - can be used with welding mixer and nozzles or with cutting attachment.

Saffire Indicator Type Regulators

Gaugeless - with indicator to signal empty cylinder.

Series 1 Single Stage

Murex DH Acetylene Welding Mixer

For use with lightweight shank and welding nozzles.

Saffire Regulators

With twin bulk head gauges clearly displaying cylinder pressure and flow rate. Comply with EN ISO 2503.
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.
ArC-35L Argon type is suitable for inert gases eg for use with Mig or Tig welders.

Series 1 Single Stage

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Murex Saffire No.5 Welding, Cutting & Heating Set

Contents: Saffire 5 shank. Acetylene welding mixer. 6 swaged welding nozzles (sizes 2, 5, 7, 10, 13 & 25). Cutting attachment, 2 ANM cutting nozzles (sizes 3/64", 1/16"), AHT 25 heating neck and tip. '0' rings. Spark lighter with 9 flints. Nozzle cleaners. Carrying case. Welding capacity up to 8mm. Cutting capacity up to 75mm.

Saffire No.5 Welding, Cutting & Heating Set