Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Murex Mig Spares

For torch compatibility please refer to our catalogue.

Contact Tips

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Murex Saffire No.5 Welding, Cutting & Heating Set

Contents: Saffire 5 shank. Acetylene welding mixer. 6 swaged welding nozzles (sizes 2, 5, 7, 10, 13 & 25). Cutting attachment, 2 ANM cutting nozzles (sizes 3/64", 1/16"), AHT 25 heating neck and tip. '0' rings. Spark lighter with 9 flints. Nozzle cleaners. Carrying case. Welding capacity up to 8mm. Cutting capacity up to 75mm.

Saffire No.5 Welding, Cutting & Heating Set

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Saffire Regulators

With twin bulk head gauges clearly displaying cylinder pressure and flow rate. Comply with EN ISO 2503.
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.
ArC-35L Argon type is suitable for inert gases eg for use with Mig or Tig welders.

Series 1 Single Stage

Murex Mig Accessories

To suit Torch MXE 20-30.

Insulator