Blue Oxygen Hose

Fitted hoses. Kink and crush resistant. 6.3mm for general use, 10mm for heavy duty use.

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Murex Process/Heating Nozzles and Adaptors

Heavy duty.

Acetylene Mixer

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Murex DH Cutting Attachment

For use with DH lightweight shank and AFN nozzles.
N.B. Illustrated with nozzle fitted - nozzles are supplied separately).

Saffire Regulators

With twin bulk head gauges clearly displaying cylinder pressure and flow rate. Comply with EN ISO 2503.
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.
ArC-35L Argon type is suitable for inert gases eg for use with Mig or Tig welders.

Series 1 Single Stage

Saffire Regulators

With twin bulk head gauges clearly displaying cylinder pressure and flow rate. Comply with EN ISO 2503.
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.
ArC-35L Argon type is suitable for inert gases eg for use with Mig or Tig welders.

Series 1 Single Stage

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks. Including 1144, Saffire 5, 4, 3, Citogas HDT200. Sizes 50 and 100 require A-HT mixer 143525.

Available in a choice of:
126134 A-HT 25 (52Btu/h [1000s])
126135 A-HT 50 (91Btu/h [1000s])
126136 A-HT 100 (139Btu/h [1000s])

Acetylene Heating Nozzles - A-HT

Murex Saffire DH3 Lightweight Shank and Attachment

Shank
Dual purpose - can be used with welding mixer and nozzles or with cutting attachment.