EFG5K

Recommended extremely high pressure and high impulse applications such as hydrostatic transmission. Rated to 5,000psi

EFG5K

Recommended extremely high pressure and high impulse applications such as hydrostatic transmission. Rated to 5,000psi

TM Multi-tube Holder

The SNC TM tube holder is ideal for managing and arranging runs of tubing. It is easy to load and firmly holds tubing in place, the holders can be mounted in place with screws.
It is possible to cut the holder to your specific requirement.
Manufactured from flame resistance resin.

Suitable for use with Nylon, Soft nylon and Polyurethane tubing.



Temperature range: -20C to +60C.
Colour: Black.

CM2T

Tested with ‘Megacrimp’ fittings to 6,000,000 impulse cycles. Nitrile tube for biodegradable hydraulic fluids. Recommended for high pressure hydraulic applications. High temperature resistance (-40°C to 100°C).
Colour coding for easy selection.

TM Multi-tube Holder

The SNC TM tube holder is ideal for managing and arranging runs of tubing. It is easy to load and firmly holds tubing in place, the holders can be mounted in place with screws.
It is possible to cut the holder to your specific requirement.
Manufactured from flame resistance resin.

Suitable for use with Nylon, Soft nylon and Polyurethane tubing.



Temperature range: -20C to +60C.
Colour: Black.

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

Copely Polyurethane Tube

CPU Series
Codeflex polyurethane tube is suitable for a wide range of applications demanding a flexible and cut resistant tube in applications such as pneumatic control systems and chemical transfer tubing. Codeflex polyurethane is well suited to applications demanding maximum kink resistance, minimum kink memory. It is suitable for fitting into confined spaces where conventional tubes lacking the above factors would increase fitting time in addition to flow restriction.

Applications:
Pneumatic control systems.
Fuel and lubrication lines.
Chemical transfer tubing.
Special features:
Exceptional abrasion resistance.
Resistance to a wide range of chemicals.
High flexibility.
Silicone-free.
Working pressures:
Nominal working pressure calculated at 23C with a 4.1 safety factor.
Temperatures: -50C/55C (short term use at 85C).
Special note:
The CPU series has been designed and developed to meet the exacting standards of the push fit type of coupling.
Supplied as 30 metre coils.

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.