Reelcare Air & Water Hose Reels

Hose reels help eliminate hose entanglement hazards in the work place. Case manufactured from UV stabilised impact
resistant plastic. Multi position ratchet allows the reel to be fixed to the wall or ceiling. Smooth hose retraction. Wide angle 160 pivoting mounting bracket. High quality black TPR hose rated to 17 bar.



Heavy duty UV stabilised polypropylene spring driven retractable hose reel suitable for compressed air or cold water up to 17 bar working pressure. The reel comes complete with 18 mtr x 12mm heavy duty hose which has been specially formulated for use on hose reels. The inlet is 1/2” bsp female and the hose terminates in a 1/2” bspt male.

Copely Suprene Air Hose

GP1 Series
Suprene GP1 air hose is a unique combination of rubber and PVC to produce Rubber PVC alloy (TPE). This innovative step has resulted in the introduction of Codeflex supreme GP1 air hose. This hose feels and looks like rubber without the associated negative aspects. Codeflex Suprene GP1 is fully flexible and is available from 5mm through to 25mm.
The smaller diameters are black with yellow stripe and 13mm and above are in opaque yellow outer sheath.
Improved fire retardancy. Tested to BS 2782 Part 1, method 141A on sample cut to 6mm wide. GP1 range has a CO1 rating of 25% O2. Conforms to ISO 5774: 1980.

Special features:
Abrasion resistance excellent.
Outstanding resistance to ageing.
Manufactured from cadmium free materials.
Resistance to a wide range of chemicals.
Good flexibility.
Reduced plasticizer migration.
Good kink resistance.
Improved resistance to oil/fuels.
Outstanding U.V/Ozone resistance.
Silicone free.
Working temperature -30C to 60C.

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

Copely Contractors Hose

BCH Series
The unreinforced PVC contractors hose has been designed as a high quality flexible and durable low pressure water hose.
Colour black. Supplied in 75m coils.

Special features:
Excellent abrasion resistance.
Manufactured from cadmium free materials.
Resistance to a wide range of chemicals.
Outstanding U.V/Ozone resistance.
Silicone free.
Flexible.
High quality fluted water hose.
Medium duty cold water hose.

Kennedy® Industrial Quality Airline Hose

Kennedy® Reinforced Clear PVC Airline Hose is a multi-purpose flexible hose reinforced with a polyester fibre braid. Ideal for use in pneumatic airline systems, crop spraying, transportation of gases & liquids, decanting of acids, salts and many other chemicals. Also fully approved for food contact applications. Operating temperature range of -20°C to 60°C.

Reinforced Clear PVC Airline Hose

Bore diameter: 19.0mm (3/4").
Maximum pressure ratings: 100psi.
Supplied in 30mtr (100ft) reels.

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

Copely Industrial Layflat Hose

LH Series
Light duty blue industrial layflat - LH series. General-purpose hose especially suitable for drainage of locations with relatively small differences in elevation; for temporary water supply: for sprinkler irrigation or due to its resistance to most chemicals, for spreading liquid fertilisers and agricultural chemicals. Colour Blue.

Special features:
Made from cadmium free materials.
Resistance to a wide range of chemicals.
Silicone free.
Abrasive resistant.
Good flexibility.
Long service life.
Minimal electrical conductivity.
Tough, puncture-proof.
Fast transfer of liquids.
Unaffected by the elements.
Operating temperature: -25C/60C.
Supplied in 10 metre coils.

Light Duty Blue

CM2T

Tested with ‘Megacrimp’ fittings to 6,000,000 impulse cycles. Nitrile tube for biodegradable hydraulic fluids. Recommended for high pressure hydraulic applications. High temperature resistance (-40°C to 100°C).
Colour coding for easy selection.

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.