Copely Low Density Polyethylene Tube

LDP Series
Low density polyethylene tube has been greatly used for many years in a wide variety of applications. It has mainly been associated with the conveyance of beer and soft drinks for the brewery industry and water for domestic services, however it is suitable for many applications requiring a relatively low cost material and has good resistance to many liquids and chemicals. It has also been used in the pneumatics field in spite of its low abrasion and cut resistance.

Special features:
Resistant to a wide range of chemicals.
High flexibility.
Silicone free.
Supplied in 30 metre coils.

Copely Suprene Air Hose

GP1 Series
Suprene GP1 air hose is a unique combination of rubber and PVC to produce Rubber PVC alloy (TPE). This innovative step has resulted in the introduction of Codeflex supreme GP1 air hose. This hose feels and looks like rubber without the associated negative aspects. Codeflex Suprene GP1 is fully flexible and is available from 5mm through to 25mm.
The smaller diameters are black with yellow stripe and 13mm and above are in opaque yellow outer sheath.
Improved fire retardancy. Tested to BS 2782 Part 1, method 141A on sample cut to 6mm wide. GP1 range has a CO1 rating of 25% O2. Conforms to ISO 5774: 1980.

Special features:
Abrasion resistance excellent.
Outstanding resistance to ageing.
Manufactured from cadmium free materials.
Resistance to a wide range of chemicals.
Good flexibility.
Reduced plasticizer migration.
Good kink resistance.
Improved resistance to oil/fuels.
Outstanding U.V/Ozone resistance.
Silicone free.
Working temperature -30C to 60C.

Copely Polyurethane Tube

CPU Series
Codeflex polyurethane tube is suitable for a wide range of applications demanding a flexible and cut resistant tube in applications such as pneumatic control systems and chemical transfer tubing. Codeflex polyurethane is well suited to applications demanding maximum kink resistance, minimum kink memory. It is suitable for fitting into confined spaces where conventional tubes lacking the above factors would increase fitting time in addition to flow restriction.

Applications:
Pneumatic control systems.
Fuel and lubrication lines.
Chemical transfer tubing.
Special features:
Exceptional abrasion resistance.
Resistance to a wide range of chemicals.
High flexibility.
Silicone-free.
Working pressures:
Nominal working pressure calculated at 23C with a 4.1 safety factor.
Temperatures: -50C/55C (short term use at 85C).
Special note:
The CPU series has been designed and developed to meet the exacting standards of the push fit type of coupling.
Supplied as 30 metre coils.

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

Kennedy® Industrial Quality Airline Hose

Kennedy® Reinforced Clear PVC Airline Hose is a multi-purpose flexible hose reinforced with a polyester fibre braid. Ideal for use in pneumatic airline systems, crop spraying, transportation of gases & liquids, decanting of acids, salts and many other chemicals. Also fully approved for food contact applications. Operating temperature range of -20°C to 60°C.

Reinforced Clear PVC Airline Hose

Bore diameter: 19.0mm (3/4").
Maximum pressure ratings: 100psi.
Supplied in 30mtr (100ft) reels.

Copely Suction & Discharge Hose

MDS Series
Medium duty, flexible suction/discharge hose. Colour: olive green. Operating temperature -15C/65C.

Features:
New improved flexible formulation.
Suction and discharge of slurry and semi liquid products.
Usage for higher vacuum applications.
Operating temperature up to 65C.
Flexible in colder temperature environment.
Available in straight cured lengths.
Supplied in 30m coils.

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

Copely Industrial Layflat Hose

LHM Series
Medium duty yellow industrial layflat hose - LHM series. Medium pressure, flat hose manufactured from plasticized PVC and reinforced with polyester yarns. For conveyance of water, other liquids or fertilizers. Also suitable for irrigation systems, sprinklers and water supply. Colour Blue.

Special features:
Made from cadmium free materials.
Resistance to a wide range of chemicals.
Silicone free.
Abrasive resistant.
Good flexibility.
Long service life.
Minimal electrical conductivity.
Tough, puncture-proof.
Fast transfer of liquids.
Unaffected by the elements.
Operating temperature: -25C/60C.
Supplied in 10 metre coils.

Medium Duty Yellow

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

Kobe? Retractable Air and Water Hose Reel

For use on assembly lines, service vans, workshops, etc. Helps to eliminate air hose entanglement hazards in the workplace. Can be fixed to the wall or ceiling. UV stabilised impact resistant plastic case. Locking ratchet. Smooth retraction. 1.5m connection hose. Male inlet and outlet made from solid brass. High quality roll formed drive spring. PVC hose rated to 17bar. 160 pivot. Air tool hanging hole. Can be easily detached from the bracket.

HRR006 6mm x 12M Retractable Air & Water Hose Reel

Inlet/outlet hose connection 1/4 BSP.