Allied Maxcut Series Y Inserts

For all dimensional specifications please refer to our catalogue.

GEN2 T-A C1 K35 Carbide AM200 Coated

Indexa-Seiki Tru-Loc Milling Chucks

The mechanical advantage provided by the 'roller lock' mechanism produces a high clamping force, along the full length of cutter shank. The force is applied evenly and so enables the chuck to hold cutters within 0.010mm at 100mm from chuck nose concentricity, giving improved component surface finish, holding better workpiece tolerances, reducing vibration and prolonging tool life. Manufactured from special alloy steel, heat treated to close hardness tolerances. Internal seals protect against entry of swarf and dirt. Tru-Loc milling collets with back stop adjustment screws ensure quick and easy cutter pre-setting and replacement, eliminating tool creep. A range of milling chucks for finishing and semi-finishing applications, with accurate tolerances and high quality surface finish.

Using the Tru-Loc Milling Chuck - when tightening the chuck use the recommended wrench and tighten fully - but without means of extra leverage. N.B. The gap between the locking ring and body may vary between 0 & 3mm dependent on cutter shank size and collet used. Maintenance: To get the best performance from this Tru-Loc milling chuck please ensure it is serviced on a regular basis by a qualified agent. It is recommended that this is at least once every twelve months. Failure to do this may affect the performance of the chuck and/or invalidate any guarantee. Collet reference PSC/PSCa.

Tru-Loc Milling Chuck IS40 Shank

Indexa-Seiki ER - Single Angle Collets

Collet Dimensions:
Capacity 0.5-10.
(D)17mm x (L)27mm.

ER16

Granlund Carbide Size 1 Counterbores

Type H. Carbide K40 micrograin. Tolerance P8.

Counterbores H with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.

For further specifications please refer to our catalogue.

Granlund Size 1 Insert Drills

Type LB HSS Tol. h8 flute 40mm.

When combining insert drills with countersinks, the drill must break through the work piece before secondary cutting commences and must not be used for blind holes.

For all technical specifications please refer to our catalogue.

Pinzbohr Standard Arbors

A comprehensive flexible boring system available for use on the majority of conventional and CNC machines.

DIN 69871-A

Commonly interchangeable with ANSI/Caterpillar shanks. ISO/DIN30 shanks available on request (ISO 7388/3 or DIN 69871-1 (A).

PNZ-144-0200K/PNZ-144-0300K are the preferred Arbors for 'MICRO' Series Heads.

Allied Maxcut Series 2 and 2.5 Inserts

For all dimensional specifications please refer to our catalogue.

GEN2 T-A K20 Carbide AM200 Coated

Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburised and hardened. Surface hardness of 58 - 60HRC. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

ER Collet Chucks

E4 to DIN 6499/B

Granlund TPGR/TPMR PK40 Clamped Inserts

To suit WHV Counterbores and KV Countersinks. The Granlund inserts have special chip-breaking angle for optimum chip control. Carbide grade PK40.

Pinzbohr Standard Boring Head Spares

To suit standard boring heads

Insert Clamp Screws