Indexa-Seiki Tapping Chucks - Tension & Compression Type

With axial compensation. Suitable for use on boring machines and machining centres. To MAS 403 BT Taper Shank.

For all technical specifications please refer to our catalogue.

MAS 403 BT Taper Shank

Allied Maxcut Series 2 and 2.5 Holders

Diameter range: 24.41 to 35.05mm.

For all dimensional specifications please refer to our catalogue.

Taper Shank

Granlund Carbide Size 1 Counterbores

Type HA. Carbide K10 micrograin. Tolerance P8.

For further specifications please refer to our catalogue.

Indexa-Seiki? XP-45C ?Hi Shear? Milling Cutters

Super Positive 45 approach milling cutter, angle decreases cutting forces and allows a quick feed in a limited capacity machine. Torx screws allow for good chip evacuation. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear. Through coolant as standard.

Dijet Mirror Ball Cutters

A range of cutter bodies and inserts for finishing the profiles of dies and moulds. Inserts are precision ground to ensure accurate workpiece form and high quality surface finish, which minimises subsequent polishing. The DZ coating provides for maximum tool life and edge durability when cutting at high speeds. Should be held in a roller lock type chuck.

For all dimensional and technical specifications please refer to our catalogue.

Straight Neck

Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

E2 Boring Bar Holders

Pinzbohr Shank Extensions

For all dimensional specifications please refer to our catalogue.

Indexa-Seiki ER - Single Angle Collets

Collet Dimensions:
Capacity 3.0-26.
(D)41mm x (L)46mm.

ER40

XP-90C ?4 Square? Milling Cutters

The Indexa-Seiki XP-90C ?4 square? milling cutters are a positive 90 cutter with an exact angle of 90, square inserts allow deep passes and high feed rates per teeth. Torx style insert pocket with shim seats help protect the body in the event of an accident. The unique Plasma Ion coating offers longer tool life and greater hardness and increases wear resistance. Through tool coolant as standard, for optimum machining results.

For all technical specifications please refer to our catalogue

Granlund Carbide Size 1 Counterbores

Type H. Carbide K40 micrograin. Tolerance P8.

Counterbores H with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.

For further specifications please refer to our catalogue.