产品 / 切削工具 / 数控刀具&附件
编号：IND1482010K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
Axial
C2 Left Hand
编号：AME1552140L
●产品描述：
Allied Maxcut Series 3 Holders
Diameter range: 34.34 to 47.80mm.
For all dimensional specifications please refer to our catalogue.
Flanged Straight Shank
编号：GRA1513725A
●产品描述：
Granlund HSS Size 1 Counterbores
Type N. HSS. Tolerence P8.
Counterbores N with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.
For further specifications please refer to our catalogue.
编号：IDX1444160K
●产品描述：
Indexa-Seiki ER - Single Angle Collets
Collet Dimensions:
Capacity 3.0-26.
(D)41mm x (L)46mm.
ER40
编号：IND1443580K
●产品描述：
Indexa-Seiki R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Available in bore sizes:
Metric: 3, 6, 8, 10, 11, 12, 14, 16 and 20mm.
Inch: 1/4, 3/8, 1/2, 5/8/ 3/4 and 7/8??.
编号：IND1409248K
●产品描述：
Indexa-Seiki Standard Pull Studs
BT-MAS 403
编号：IND1443590K
●产品描述：
Indexa-Seiki R8 Collets for Bridgeport Machines
Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.
Available in bore sizes:
Metric: 3, 6, 8, 10, 11, 12, 14, 16 and 20mm.
Inch: 1/4, 3/8, 1/2, 5/8/ 3/4 and 7/8??.
编号：ISC1224512C
●产品描述：
Iscar Milling Inserts
Grade Description: IC808 A tough submicron substrate, improved TiAIN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance.
ANKX Indexable Milling Insert
编号：TSH1162233M
●产品描述：
Tungaloy CCMT Indexable Turning Inserts
T9025 (ISO P20-P30, M20-M30)A finishing and medium cut for steels and stainless steel. Gives superior and consistent surface finish
编号：AME1551060F
●产品描述：
Allied Maxcut Series 1 and 1.5 Holders
Diameter range: 17.53 to 24.38mm.
For all dimensional specifications please refer to our catalogue.
Taper Shank