Accuport 432 Port Contour Cutter Range

For all dimensional information please refer to our catalogue.
Port Standards: SAE J-1926/ISO11926-1 and MS16142.

Spare Reverse Clutches

To suit Indexa-Seiki tapping heads.

Indexa-Seiki SL - Sidelock Adaptors

For Weldon shank cutters, adaptors and tapping chucks. Manufactured to stringent quality standards.

Standard Length

To QC ISO/DIN 2080 Quick Change

Granlund Size 1 Pilots

Type R Roller. c9.

When working ?dry? type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.

For all technical specifications please refer to our catalogue.

ZMac Boring Head Set 20-70mm

Features double contact support. New locking screw close to cutting edge. Balanced head for reduced vibration available. Improved accuracy. Improved reliability and durability. Easy to use and adjust. Multi-purpose machining - steel, cast iron, hardened steel.

Z-MAC Set Contains:
Boring Heads:
Z-MAC20 (20 - 25mm)
Z-MAC25 (25 - 32mm)
Z-MAC32 (32 - 42mm)
Z-MAC42 (42 - 55mm)
Z-MAC55 (55 - 70mm)
Accessories:
Z-MAC 2, 3, 4 & 5 Spanners. TX6 & TX8 Torx Keys. 2, 3, 4 & 5mm Hex Keys. 3 Spare Centre Screws.

Indexa-Seiki ER - Single Angle Collets

Collet Dimensions:
Capacity 2.0-20.
(D)33mm x (L)40mm.

ER32

Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

Axial

C2 Left Hand

Indexa-Seiki Indexable Tooling Spares

Within the Index-Seiki? range of indexable tooling spares you will find insert screws, Torx? keys, shims, clamps and pins to fit the Index-Seiki? toolholder you?re using.

Pinzbohr Boring Systems



Bohrstar 54 Boring System Kit

The Bohrstar 54 kit from Pinzbohr delivers the following features and benefits:
High strength and rigidity that is required for accuracy and repeatability.
A V-groove locking insert cartridge for improved rigidity.
All the compents of the kit are manufactured from nickel-chromium alloy.
Tapered Screw and Locking Pin Coupling
Tapered screws for most rigid coupling.
Dampens vibration under load.
Pin guarantees accurate head position.
Saves you money on tooling costs.
Saves time on the shop floor.
Performance guarantee.
The Bohrstar kit components are easy to install and require no special training or tools to use.

Boring range: 8 ~ 170mm.
Accuracy: to 0.0001
Bohrstar Kit Contents:
1x 54mm Bohrstar head with accu-set dial (38 ~ 59mm).
6x boring bars (8 ~ 43mm).
2x adaptor plates with cartridge insert (83 ~ 170mm).
Also includes counterweight, adjusting key, location sleeve, hexagon key, Torx key and fixing screws.

For all technical specifications please refer to our catalogue.

Allied Maxcut Series 2 and 2.5 Holders

Diameter range: 24.41 to 35.05mm.

For all dimensional specifications please refer to our catalogue.

Flanged Straight Shank