产品 / 切削工具 / 数控刀具&附件
编号：IND1483300K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburised and hardened. Surface hardness of 58 - 60HRC. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
E2-3 Morse Taper Sleeves
编号：IND1443502K
●产品描述：
Indexa-Seiki SL - Sidelock Adaptors
For Weldon shank cutters, adaptors and tapping chucks. Manufactured to stringent quality standards.
Standard Length
To BT-MAS 403
编号：GRA1513312A
●产品描述：
Granlund Carbide Size 1 Counterbores
Type H. Carbide K40 micrograin. Tolerance P8.
Counterbores H with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.
For further specifications please refer to our catalogue.
编号：IDX1449228K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
DIN SZ1
编号：IDX1449224K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
DIN SZ1
编号：PNZ1440270K
●产品描述：
Pinzbohr Standard Arbors
A comprehensive flexible boring system available for use on the majority of conventional and CNC machines.
DIN 69871-A
Commonly interchangeable with ANSI/Caterpillar shanks. ISO/DIN30 shanks available on request (ISO 7388/3 or DIN 69871-1 (A).
PNZ-144-0200K/PNZ-144-0300K are the preferred Arbors for 'MICRO' Series Heads.
编号：IND1443536K
●产品描述：
Indexa-Seiki Flatted Shank Adaptors
Allows existing Weldon Shank Side Lock Arbors to hold smaller shank cutters.
Flatted Shank Adaptor
编号：IDX1440780K
●产品描述：
PSC and PSCa (adjustable) Collets for Plain Shank Cutters
Tru-Loc Collets are available for plain shank cutters in two different styles, PSC non adjustable and PSCa - Collets with an adjustable back-stop screw to allow more accurate & consistent cutter replacement.
For all dimensional specifications please refer to our catalogue.
PSC Type
编号：GRA1513393F
●产品描述：
Granlund Carbide Size 1 Counterbores
Type HA. Carbide K10 micrograin. Tolerance P8.
For further specifications please refer to our catalogue.
编号：IDX1443324K
●产品描述：
Indexa-Seiki ER Single-Angle Collets
Collet Dimensions:
Capacity 3.0-13.
(D)21mm x (L)31.5mm.
ER20