Iscar Helido Indexable Endmills and Facemills

The new HELIDO H490 ANKX rectangular inserts have 4 helical right-hand positive cutting edges. They were designed in cutting edge lengths of 9, 12 and 17 mm. Insert construction is very thick and strong; clamped into a dovetail inclined pocket which provides a very rigid clamping and has a wiper which leaves an excellent surface finish.

Due to its strong construction, unique chip deflector with positive cutting angles and excellent grade combinations, this new family features high durability, low cutting forces and long tool life. Our most advanced SUMO TEC grades ensure excellent performance and reliability.

The new HELIDO tools can be used for machining steel, stainless steel and cast iron at very high machining parameters. HELIDO"s state-of-the-art of milling insert design, enables excellent performance and extremely high productivity.

H490 - A new family of double-sided inserts with 4 helical cutting edges.

For further specification on this product please see refer to our catalogue page.

H490 F90AX...-09 Indexable Face Mills

Face Mills with double-sided inserts, diameter range 32-63mm.

Indexa-Seiki ER Spanners & Locknuts

Suitable for all collet chucks including straight shank.

Allied Maxcut Series 2 and 2.5 Inserts

For all dimensional specifications please refer to our catalogue.

Allied Maxcut GEN2 T-A HSS Super Cobalt AM200 Coated

Allied Maxcut Thread Mills

The MaxThread™ threadmill range is manufactured from solid carbide with ground helical flutes and a TiAlN coating as standard. These product have been designed for the low volume/low cost production environment, providing excellent performance at a competitive price. A helical flute design has been maintained across the MaxThread™ range to allow
for maximum production benefits and to negate the need for straight flute thread mills. A comprehensive range of thread forms and technical information further supports the programme.

Features and Benefits:
Helical flute which offers increased strength and rigidity when cutting forces are applied.
TiAlN coated for increased tool life over uncoated tools.
Extensive range of thread forms.
High quality for consistent predictable production.



BSPP Thread Mills

Granlund HSS Size 1 Counterbores

Type N. HSS. Tolerence P8.

Counterbores N with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.

For further specifications please refer to our catalogue.

Allied Maxcut Series Y Inserts

For all dimensional specifications please refer to our catalogue.

GEN2 T-A C2 K20 Carbide AM200 Coated

Indexa-Seiki XP Range

A new generation of Indexa Seiki? 'XtraPlasma' indexable weldon end mills and shell mills with plasma ion coating and through coolant. A 90 approach angle for profiling, slotting and face milling. Plasma ion coating offers a longer tool life and greater hardness that is more resistant to wear.

100mm Shell Mill

Indexa-Seiki Taper Shank Tool Banks

Tool blanks have hardened and ground shanks with a plain front end which is machinable, ideal for the production of special boring bars and adaptors. Other sizes are also available to special order.



BT BT-MAS 403 DN DIN 69871/A IS/QC ISO/DIN 2080

Indexa-Seiki Tapping Collets

Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.

For all technical specifications please refer to our catalogue.

DIN SZ1

Dijet Mirror Ball Cutters

A range of cutter bodies and inserts for finishing the profiles of dies and moulds. Inserts are precision ground to ensure accurate workpiece form and high quality surface finish, which minimises subsequent polishing. The DZ coating provides for maximum tool life and edge durability when cutting at high speeds. Should be held in a roller lock type chuck.

For all dimensional and technical specifications please refer to our catalogue.

Taper Neck