T-Slot Clamping Kits

Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non alloy carbon steel. Heat treated to HRC 28-32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.



Contents: Engineers Studs (4 off each): 75, 100, 125, 150, 175 & 200mm long. Step Blocks (4 off each): 28, 35 & 98mm high. Step Clamps (2 off each): 64, 100 & 150mm long. Nuts Extension 4 off Flanged 6 off T- slot 6 off.

Iscar Helido Indexable Endmills and Facemills

The new HELIDO H490 ANKX rectangular inserts have 4 helical right-hand positive cutting edges. They were designed in cutting edge lengths of 9, 12 and 17 mm. Insert construction is very thick and strong; clamped into a dovetail inclined pocket which provides a very rigid clamping and has a wiper which leaves an excellent surface finish.

Due to its strong construction, unique chip deflector with positive cutting angles and excellent grade combinations, this new family features high durability, low cutting forces and long tool life. Our most advanced SUMO TEC grades ensure excellent performance and reliability.

The new HELIDO tools can be used for machining steel, stainless steel and cast iron at very high machining parameters. HELIDO"s state-of-the-art of milling insert design, enables excellent performance and extremely high productivity.

H490 - A new family of double-sided inserts with 4 helical cutting edges.

For further specification on this product please see refer to our catalogue page.

H490 F90AX...-09 Indexable Face Mills

Face Mills with double-sided inserts, diameter range 32-63mm.

Allied Maxcut Thread Mills

The MaxThread™ threadmill range is manufactured from solid carbide with ground helical flutes and a TiAlN coating as standard. These product have been designed for the low volume/low cost production environment, providing excellent performance at a competitive price. A helical flute design has been maintained across the MaxThread™ range to allow
for maximum production benefits and to negate the need for straight flute thread mills. A comprehensive range of thread forms and technical information further supports the programme.

Features and Benefits:
Helical flute which offers increased strength and rigidity when cutting forces are applied.
TiAlN coated for increased tool life over uncoated tools.
Extensive range of thread forms.
High quality for consistent predictable production.

BSW Thread Mills

Solid Carbide Threadmills BSW

Kennedy® Industrial Drill Chuck Arbors

Precision machined, fully hardened & ground to give maximum surface contact.

Morse Taper Drive to Jacobs Taper

Pinzbohr Shank Extensions

For all dimensional specifications please refer to our catalogue.

Pinzbohr Modular Boring System Heads

Simultaneous movement of both slide-blocks on rough boring heads. Inner pre-load device between body and slide block on finish boring heads. Override device on adjusting screw in rough boring heads. Few boring head components. Simple adjusting and locking mechanism. Setting diameter with boring head mounted in machine tool using micrometer or caliper. After setting to the required diameter it prevents slide block from moving while tightening lock screw. Prevents adjusting screw from stripping threads; very easy and fast to adjust. Precision machined components. Made from chrome nickel alloy tool steel. Modular components - simple yet secure coupling system. Large adjusting ranges on rough and finish boring heads. Rough and finish boring heads for many insert styles. High accuracy and repeatability. Very rugged - excellent durability. Components remain securely locked even under severe machining conditions.

75 and 90 Rough Boring and Finish Boring Heads:
Dual insert head design for heavy duty roughing. 12 different head sizes cover a diameter range from 24 to 500mm. Integral insert pocket design for head sizes 22 - 54. Insert cartridge design for head sizes 68 - 500. Heads and cartridges available for up to 5 different insert styles (MC.., CC.., CN.., TC.., WC..). Simultaneous adjustment of the slide blocks. Override device to prevent stripping of adjusting screw. Micrometer adjustment on large boring heads, with 0.01mm increments. Cartridges have own radial adjusting screw for individual setting of cartridges. Change to different lead angle or insert style by simply exchanging cartridges.

Cartridge Design for Heads Size 68 ? 500mm:
Cartridges available for 5 different insert styles (MC.., CC.., CN.., TC.., WC..) Cartridges available with 75 and 90 lead angle, equipped with a radial adjusting screw for setting centrality or radial stagger. Available in pairs for symmetric or axial staggered insert set-up.

Granlund HSS Size 1 Counterbores

Type W. HSS. Tolerence P8.

Counterbores W with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.

For further specifications please refer to our catalogue.

Allied Maxcut Series 3 Holders

Diameter range: 34.34 to 47.80mm.

For all dimensional specifications please refer to our catalogue.

Taper Shank

Dijet Mirror Ball Cutters

A range of cutter bodies and inserts for finishing the profiles of dies and moulds. Inserts are precision ground to ensure accurate workpiece form and high quality surface finish, which minimises subsequent polishing. The DZ coating provides for maximum tool life and edge durability when cutting at high speeds. Should be held in a roller lock type chuck.

For all dimensional and technical specifications please refer to our catalogue.

Taper Neck

Allied Maxcut Series 1 and 1.5 Holders

Diameter range: 17.53 to 24.38mm.

For all dimensional specifications please refer to our catalogue.

Flanged Straight Shank