Anti-Static Foaming Cleaner - Amberclens

A multi-purpose, anti-static foaming cleaner. Ideal for general cleaning on a wide variety of electronic, industrial, aerospace and commercial equipment. Removes tough, stubborn stains such as grease, grime, dirt and nicotine. Safe for use on plastics, metals, painted and glazed surfaces. Anti-static formulation, reduces the attraction of airborne dust. Foaming action limits over application. Fitted with 360 spray system for all angle use. Quick and easy to use. Spray on, wipe off.Meets Military, Rail and automotive specifications:- NATO catalogue No. 6550-99-2125987.- British Rail catalogue No. 7/7056.- Ford Motor Company Tox No. 148491.

Lec-Klene High Flash Point Solvent Degreaser

A highly refined, ultra low odour solvent cleaner which has been formulated to satisfy the exact requirements of military, aerospace and defence related industries.



High flash point degreaser - safer in use. Ideal for use in confined areas. Powerful solvent cleaner which rapidly removes oil, grease, wax, tar, bitumen, brake block dust and other general soiling. No detrimental effect on painted surfaces, ferrous and non-ferrous metals, and epoxy based composites, acrylic sheet, plastics and rubbers. Meets military and industrial specifications: DEF STAN 68-148 issue 2. ASTM F519-97 (hydrogen embrittlement). ASTM F1110 (sandwich corrosion). Controlled evaporation. Zero residue on evaporation. Virtually odourless in use. Non-conductive.

LPS® A-151 Solvent Degreaser

This high flash point solvent penetrates quickly removing oil, grease, corrosion inhibiting compounds and other contaminants. A-151 has a flash point of 175°F (79°C) which allows it to be used in areas where flammability poses a potential problem. A-151 is also ideal for dip tanks. It does not contain any chlorinated solvents and is safe to use on most surfaces. NSF C1 registration 059811: (aerosol); 059812: (bulk).

Solent Maintenance Aerosols

Within the Solent Maintenance range of aerosols you'll find electrical contact rapid cleaners, foam cleaners, multi purpose oils, penetrating sprays, rust protection, flaw detectors, weld anti splatter, mould release, drive belt dressing sprays and many more.

All are formulated to stringent standards of quality, to meet the demands of the commercial user!

SC1-500B Rapid Dry Industrial Solvent Cleaner

Solent SC1-500B Rapid Dry Industrial Solvent Cleaner is supplied in a large 500 ml aerosol; it is formulated to quickly penetrate grease, oil and general soiling on metal/electrical components and precision parts allowing them to be cleaned quickly. The formulation rapidly evaporates leaving a clean dry surface it is very effective at temperatures ranging from 5C to 30C.

It is Safe to use on most plastic components. It will soften some lacquers. If in doubt about suitability, test on a scrap component or a small area before general application.

Techniclean MTC 43 Machine Tool Cleaner

Techniclean MTC 43 is a medium to heavy duty machine tool cleaner and steriliser, based upon powerful low foaming surfactants, emulsifiers and antimicrobiological agents.
APPLICATION
Techniclean MTC 43 has been specifically formulated to deal with a wide variety of machine tool contaminants and is easy to use with minimum disruption to production, being added direct to the coolant system whilst still in operation.
FEATURES
Compatible with common soluble coolants and metal substrates
Keeps machine tools in a clean and efficient condition
Cleans machine tool systems of a wide range of contaminants including fatty build-up in pipelines and floor ducts
Kills bacteria and fungis
Emulsifies floating tramp oil
Low foaming properties
No further corrosion protective required
Used whilst machines are operating normally
CONDITIONS OF USE
An addition of 1 - 3% of Techniclean MTC 43 is recommended. The amount added depends on the general condition of the coolant system (1% is usually adequate)
Introduce Techniclean MTC 43 where there is a good coolant movement e.g. immediately beyond the pump outflow back to the main settling tank, or direct into a velocity trench or floor
return channel. This ensures complete mixing with the coolant.
Add Techniclean MTC 43 8 - 24 hours the day before the coolant is scheduled to be discarded. The machine tools should then be operated normally for a minimum of eight hours.
Machine tools, which are not wetted by the emulsion, could be cleaned manually by using a 2 - 3% dilution of Techniclean MTC 43.
Following this period of circulation (max 24 hours), empty the entire coolant system and machines and dispose of the coolant in accordance with normal work procedures.
Rinsing with a fresh coolant (about 1%) is recommended.

Images not available for 5kg or 219kg

Ambersil Air Duster

Powerful, dry, inert gas. A liquefied propellant which provides a powerful blast for the easy removal of dust and loose contamination from precision equipment such as cameras and printed circuit boards to general cleaning in areas where the use of a liquid cleaner may be undesirable.
Non-flammable.
Powerful yet economical in use.
Extension tube helps to reach inaccessible/ remote areas.
Non ozone depleting, does not contain CFC’s or HCFC’s.
Meets military specification - NATO catalogue No. 6830-99-3826112.
Safe on plastics, rubbers and painted surfaces.

Janitol® Altrans

Biodegradable, acidic metal cleaner specifically formulated to remove rust, oxidation and corrosion from most metals. Will also dissolve concrete and mortar on tools and equipment.

Image not available for 25ltr

Ambersil Polymer Remover

Extremely effective and powerful solvent blend, which has been developed for use on heavily soiled moulds and dies to remove a variety of moulding deposits.

Flexiclean Aqueous Alkaline Cleaner

A multi-purpose low foaming liquid alkaline cleaner which can be used over a wide range of temperatures. Suited to a very wide range of operations in production engineering. It is both nitrite and phosphate free, as well as being suitable for virtually all ferrous and non-ferrous metals. Compatible with aluminium

Can be used as:
* An industrial spray wash cleaner for removing fine swarf, dirt, machine oil, and metalworking coolant from machined components.
* A machine tool cleaner for central systems, individual sumps, and other contaminated areas of machine tools. It is suitable for use with all types of soluble metalworking fluids including synthetics.
* A general purpose maintenance cleaner on floors, walls and other hard surfaces.
* A deburring, smoothing and deflashing medium in conjunction with abrasive stones.
* A dip tank cleaner for removal of light contamination. More difficult soils can be removed in immersion equipment agitated by mechanical shakers, pneumatic reciprocators, air sparging or ultrasonics.

Benefits:
* Eliminates the need to stock a wide variety of cleaners and avoids the danger of mixing one product with another.
* Does not affect suitably painted surfaces of machine tools, equipment and industrial surfaces including cement and plastics.
* Can be used at concentrations as low as 1% at ambient temperatures in many applications.
* Multi metal use.
* Can be used with all types of industrial spray washing machines and maintenance cleaning equipment.

Recommended dilution rates:
Industrial spray washing: 1% - 10% concentration depending on the contaminant to be removed, substrate, and inhibition required.
Coolant system cleaning: 0.5% - 2% of Flexiclean should be added to the system on the day before the coolant is due to be discharged will ensure thorough cleaning by the time the entire coolant system is emptied the following day.

VHB Surface Cleaner

VHB surface preperation cleaner is ideal to aid preperation of a surface prior to applying VHB tape be it a single or double sided adhesive tape. Supplied in 1 litre bottle or a box of 100 sachets.