LPS® A-151 Solvent Degreaser

This high flash point solvent penetrates quickly removing oil, grease, corrosion inhibiting compounds and other contaminants. A-151 has a flash point of 175°F (79°C) which allows it to be used in areas where flammability poses a potential problem. A-151 is also ideal for dip tanks. It does not contain any chlorinated solvents and is safe to use on most surfaces. NSF C1 registration 059811: (aerosol); 059812: (bulk).

Lec-Klene High Flash Point Solvent Degreaser

A highly refined, ultra low odour solvent cleaner which has been formulated to satisfy the exact requirements of military, aerospace and defence related industries.



High flash point degreaser - safer in use. Ideal for use in confined areas. Powerful solvent cleaner which rapidly removes oil, grease, wax, tar, bitumen, brake block dust and other general soiling. No detrimental effect on painted surfaces, ferrous and non-ferrous metals, and epoxy based composites, acrylic sheet, plastics and rubbers. Meets military and industrial specifications: DEF STAN 68-148 issue 2. ASTM F519-97 (hydrogen embrittlement). ASTM F1110 (sandwich corrosion). Controlled evaporation. Zero residue on evaporation. Virtually odourless in use. Non-conductive.

WD40SP Fast Drying Contact Cleaner

Fast active non-conductive cleaner. Perfect for cleaning electrical equipment, contacts, plastic and rubber. Penetrates quickly and leaves no residue. Penetrates in those hard to reach areas.

Ambersil Brake Cleaner

Powerful cleaner/degreaser for brake and clutch parts.
A non-chlorinated solvent blend, formulated to quickly and safely remove brake fluid, grease, oil and other contaminants from brake and clutch parts. Helps brakes last longer and perform better. Reduces disc-brake squeal and clutch chatter.
Can be applied without disassembly.
Saves time and reduces maintenance costs.
Evaporates quickly and leaves no residue.
Low surface tension gives excellent penetration and ensures superior dissolving and degreasing properties.
Stable, non-staining and non-corrosive to metals.
Safe on most plastics, coatings and rubbers (test prior to use).
Fitted with a 360O Spray System for all angle use, even upside down.

Amberklene Glass Cleaner

For cleaning glass and vitreous surfaces without film or smearing. For use on lenses, glass surfaces in photocopiers, windows, mirrors, tiles and other glazed areas.

SiteSafe® Maintenance Sprays

The SiteSafe® CCA500 contact cleaner is suitable for cleaning and degreasing delicate components such as those used in electrical equipment.

It can be used on most surfaces and will not effect PCBs, delicate plastics or painted surfaces. Non-corrosive formulation makes it suitable for cleaning parts of computers, typewriters, video and recording equipment, delicate switchgear, televisions and signalling mechanisms, flushing away all unwanted residues.

It contains only solvents which are permitted under the Montreal Protocol.

CCA500 Contact Cleaner Spray Trike Free

Janitol® Altrans

Biodegradable, acidic metal cleaner specifically formulated to remove rust, oxidation and corrosion from most metals. Will also dissolve concrete and mortar on tools and equipment.

Image not available for 25ltr

So-Clean "Plus" Multi Cleaner and Degreaser

Low surface tension and high surfactant levels, which afford the optimal degreaser detergency following metal working and heat treatment. The nature of the surfactants gives excellent separation properties and low foam tendency (even with low temperature and high pressures). So-Clean Ferrous is a "salts-free" and oil free product. For this reason surfaces cleaned with this product have minimal organic and inorganic residues. So-Clean Ferrous has passivation properties, affording good protection against corrosion (depending on water quality) even during the tempering process. Can be used in high pressure systems up to 400 bar. So-Clean Ferrous is designed to give extraordinarily long life.
Available in grade SC-MULTI.
Supplied in 20 litre stacking poly containers.

Ambersil BA40 Water Soluble Solvent

A specialist solvent cleaner/degreaser designed to remove a variety of uncured sealant and adhesive residues, principally in aerospace applications.
Extremely fast evaporating solvent degreaser.
Removes many stubborn residues such as uncured polysulphides, adhesives, inks, resins, varnishes and lacquers.
Safe for use on metals.
Low pressure spray provides even coverage and prevents splash back in use.
Leaves no residues.

Electronic Cleaning Solvent

Universally accepted safe solvent for the quick and efficient cleaning of delicate electrical and electronic components, in a wide variety of electronic, computing, aerospace and industrial applications. Gentle, yet highly effective alcohol based cleaner. Excellent material compatibility, safe to use on plastics and rubber. Can be used to remove moisture by forming an azeotrope - a mixture of IPA and water that evaporates quicker than water. Conforms to BS 1595, ASTM D770 and DIN 53245. Evaporates to leave a clean, dry surface. Ideal for cleaning video and audio heads, photocopier drums, optical devices, Switches and PCB’s.

Images not available for 5ltr or 25ltr

IPA