GS5 - Gasket Stripper

A non-running, fast acting, foaming gasket remover. Works on vertical surfaces. Reduces scraping and sanding. Prevents damage to flanges. Also removes other difficult to shift contaminants.
Excellent temperature tolerance: -35°C to +35°C.
Non-flammable.
Size: 400ml.

Solent Maintenance Aerosols

Within the Solent Maintenance range of aerosols you'll find electrical contact rapid cleaners, foam cleaners, multi purpose oils, penetrating sprays, rust protection, flaw detectors, weld anti splatter, mould release, drive belt dressing sprays and many more.

All are formulated to stringent standards of quality, to meet the demands of the commercial user!

SC1-500B Rapid Dry Industrial Solvent Cleaner

Solent SC1-500B Rapid Dry Industrial Solvent Cleaner is supplied in a large 500 ml aerosol; it is formulated to quickly penetrate grease, oil and general soiling on metal/electrical components and precision parts allowing them to be cleaned quickly. The formulation rapidly evaporates leaving a clean dry surface it is very effective at temperatures ranging from 5C to 30C.

It is Safe to use on most plastic components. It will soften some lacquers. If in doubt about suitability, test on a scrap component or a small area before general application.

WD40SP Fast Drying Degreaser

Cleans equipment to make it run smoother and last longer. Works immediately on contact. Easy to rinse and leaves no residue. Cleans away oil, grease, dirt and grime. Can be used on a variety of surfaces, including metal.

Ambersil Brake Cleaner

Powerful cleaner/degreaser for brake and clutch parts.
A non-chlorinated solvent blend, formulated to quickly and safely remove brake fluid, grease, oil and other contaminants from brake and clutch parts. Helps brakes last longer and perform better. Reduces disc-brake squeal and clutch chatter.
Can be applied without disassembly.
Saves time and reduces maintenance costs.
Evaporates quickly and leaves no residue.
Low surface tension gives excellent penetration and ensures superior dissolving and degreasing properties.
Stable, non-staining and non-corrosive to metals.
Safe on most plastics, coatings and rubbers (test prior to use).
Fitted with a 360O Spray System for all angle use, even upside down.

Stainless Steel Cleaning Spray

Stainless steel polish used in conjuction with scotchbrite handpads for stainless finishing

Cleans and polishes in one easy step leaving no greasy surface build-up
Leaves a light protective film that restores sheen and reducing fingerprinting.

Superclean Safety Solvent

7061 is a non-CFC solvent based formulation for cleaning and degreasing of surfaces to be bonded with Loctite adhesives.

LPS® Electro Contact Cleaner

Fast drying, CFC-free, cleans and degreases delicate precision mechanisms with its fast-penetrating action to remove oil, grease, dirt, flux and other contaminants. CFC-free is safe on metal and plastic, is fast evaporating, does not leave a residue and does not contain HCFCs. NSF K2 registration 059813: (aerosol); 059814: (bulk).

Electronic Cleaner Plastic Safe

An effective formula for removing dirt and tape oxides from audio and video recording heads. Suitable for removal of carbon deposits from photocopy equipment. Effectively absorbs moisture from electronic component PCBs. Meets the following approval BS1595, ASTMD 770, DIM53245.

IPA

Techniclean MTC 43 Machine Tool Cleaner

Techniclean MTC 43 is a medium to heavy duty machine tool cleaner and steriliser, based upon powerful low foaming surfactants, emulsifiers and antimicrobiological agents.
APPLICATION
Techniclean MTC 43 has been specifically formulated to deal with a wide variety of machine tool contaminants and is easy to use with minimum disruption to production, being added direct to the coolant system whilst still in operation.
FEATURES
Compatible with common soluble coolants and metal substrates
Keeps machine tools in a clean and efficient condition
Cleans machine tool systems of a wide range of contaminants including fatty build-up in pipelines and floor ducts
Kills bacteria and fungis
Emulsifies floating tramp oil
Low foaming properties
No further corrosion protective required
Used whilst machines are operating normally
CONDITIONS OF USE
An addition of 1 - 3% of Techniclean MTC 43 is recommended. The amount added depends on the general condition of the coolant system (1% is usually adequate)
Introduce Techniclean MTC 43 where there is a good coolant movement e.g. immediately beyond the pump outflow back to the main settling tank, or direct into a velocity trench or floor
return channel. This ensures complete mixing with the coolant.
Add Techniclean MTC 43 8 - 24 hours the day before the coolant is scheduled to be discarded. The machine tools should then be operated normally for a minimum of eight hours.
Machine tools, which are not wetted by the emulsion, could be cleaned manually by using a 2 - 3% dilution of Techniclean MTC 43.
Following this period of circulation (max 24 hours), empty the entire coolant system and machines and dispose of the coolant in accordance with normal work procedures.
Rinsing with a fresh coolant (about 1%) is recommended.

Images not available for 5kg or 219kg

Lec-Klene High Flash Point Solvent Degreaser

A highly refined, ultra low odour solvent cleaner which has been formulated to satisfy the exact requirements of military, aerospace and defence related industries.



High flash point degreaser - safer in use. Ideal for use in confined areas. Powerful solvent cleaner which rapidly removes oil, grease, wax, tar, bitumen, brake block dust and other general soiling. No detrimental effect on painted surfaces, ferrous and non-ferrous metals, and epoxy based composites, acrylic sheet, plastics and rubbers. Meets military and industrial specifications: DEF STAN 68-148 issue 2. ASTM F519-97 (hydrogen embrittlement). ASTM F1110 (sandwich corrosion). Controlled evaporation. Zero residue on evaporation. Virtually odourless in use. Non-conductive.