SiteSafe® Anti-Static Foam Cleaner

FCA500
This cleaner is recommended for the everyday cleaning of electronic and electrical equipment. It removes stubborn stains, nicotine, grease and general grime build-up from plastic, formica, leatherette, ceramics, glass, paintwork or any other non-porous hard surface. Ideal for use in offices, canteens, banks, schools, kitchens, washrooms and many other problem areas. It has been formulated from surfactants and solvents which are safe to use on most surfaces. Size: 500ml aerosol.

So-Clean "Plus" Multi Cleaner and Degreaser

Low surface tension and high surfactant levels, which afford the optimal degreaser detergency following metal working and heat treatment. The nature of the surfactants gives excellent separation properties and low foam tendency (even with low temperature and high pressures). So-Clean Ferrous is a "salts-free" and oil free product. For this reason surfaces cleaned with this product have minimal organic and inorganic residues. So-Clean Ferrous has passivation properties, affording good protection against corrosion (depending on water quality) even during the tempering process. Can be used in high pressure systems up to 400 bar. So-Clean Ferrous is designed to give extraordinarily long life.
Available in grade SC-MULTI.
Supplied in 20 litre stacking poly containers.

So-Cleaner "Plus" System

Very effective system cleaner for use in cleaning water based operating fluids and coolants from central systems or individual machines. Compatible with a large number of operating fluids including SO-COOL and SO-CLEAN products. Free of secondary alkanolamines, heavy metal compounds, phenols, hexahydrotriazine and nitrite. Excellent cleaning action. Storage temperature of 5 to +40C.
NOTE: So-Clean System at 1- 2% is added to the used operating fluid about eight to twelve hours before draining. The complete cleaning effect is only achieved if the operating fluid circulates through all working parts of the system. Neither pH value nor foaming of the operating fluid change significantly when So-Clean System is added. Soil in machines, tubes and reservoirs of the system are loosened and re-emulsified. For heavily soiled systems, increasing the dwell time to 24 hours is recommended. Thick sediment deposits are best removed Mechanically and rinsed off with clean water.
Available in grade SC-SYSTEM.
Supplied in 20 litre stacking poly container.

Electrical Contact Cleaner Spray - Trike Free

Solent Electrical Contact Cleaner is an effective solvent based cleaner packed in a large 500 ml aerosol. The product is formulated to remove oil, grease, and carbon dust from electrical switch gear and electronic components. Solent Electrical Contact Cleaner is safe on most common plastic parts, but will attack lacquer finishes and coatings. If in doubt about suitability, trial the product on a scrap sample first before general application. The product is propelled from the aerosol by CO2 Carbon Dioxide gas. CO2 is non-flammable. Electrical Switch Cleaner fluid is flammable. Always ensure power is switched off before applying this product to electrical equipment.

Foaming Cleaner Spray

Cuts through grease, dirt, oil and general soiling, contains no silicones. Ideal for non-porous surfaces. 10001 uses in the home, industry, garage or factory. Size: 400ml aerosol.

Solent Maintenance Aerosols

Within the Solent Maintenance range of aerosols you'll find electrical contact rapid cleaners, foam cleaners, multi purpose oils, penetrating sprays, rust protection, flaw detectors, weld anti splatter, mould release, drive belt dressing sprays and many more.

All are formulated to stringent standards of quality, to meet the demands of the commercial user!

SC1-500B Rapid Dry Industrial Solvent Cleaner

Solent SC1-500B Rapid Dry Industrial Solvent Cleaner is supplied in a large 500 ml aerosol; it is formulated to quickly penetrate grease, oil and general soiling on metal/electrical components and precision parts allowing them to be cleaned quickly. The formulation rapidly evaporates leaving a clean dry surface it is very effective at temperatures ranging from 5C to 30C.

It is Safe to use on most plastic components. It will soften some lacquers. If in doubt about suitability, test on a scrap component or a small area before general application.

WD40SP Fast Drying Degreaser

Cleans equipment to make it run smoother and last longer. Works immediately on contact. Easy to rinse and leaves no residue. Cleans away oil, grease, dirt and grime. Can be used on a variety of surfaces, including metal.

WD40SP Fast Drying Contact Cleaner

Fast active non-conductive cleaner. Perfect for cleaning electrical equipment, contacts, plastic and rubber. Penetrates quickly and leaves no residue. Penetrates in those hard to reach areas.