Techniclean MTC 43 Machine Tool Cleaner

Techniclean MTC 43 is a medium to heavy duty machine tool cleaner and steriliser, based upon powerful low foaming surfactants, emulsifiers and antimicrobiological agents.
APPLICATION
Techniclean MTC 43 has been specifically formulated to deal with a wide variety of machine tool contaminants and is easy to use with minimum disruption to production, being added direct to the coolant system whilst still in operation.
FEATURES
Compatible with common soluble coolants and metal substrates
Keeps machine tools in a clean and efficient condition
Cleans machine tool systems of a wide range of contaminants including fatty build-up in pipelines and floor ducts
Kills bacteria and fungis
Emulsifies floating tramp oil
Low foaming properties
No further corrosion protective required
Used whilst machines are operating normally
CONDITIONS OF USE
An addition of 1 - 3% of Techniclean MTC 43 is recommended. The amount added depends on the general condition of the coolant system (1% is usually adequate)
Introduce Techniclean MTC 43 where there is a good coolant movement e.g. immediately beyond the pump outflow back to the main settling tank, or direct into a velocity trench or floor
return channel. This ensures complete mixing with the coolant.
Add Techniclean MTC 43 8 - 24 hours the day before the coolant is scheduled to be discarded. The machine tools should then be operated normally for a minimum of eight hours.
Machine tools, which are not wetted by the emulsion, could be cleaned manually by using a 2 - 3% dilution of Techniclean MTC 43.
Following this period of circulation (max 24 hours), empty the entire coolant system and machines and dispose of the coolant in accordance with normal work procedures.
Rinsing with a fresh coolant (about 1%) is recommended.

Images not available for 5kg or 219kg

7063 - Cleaner

General purpose industrial cleaner for cleaning and degreasing surfaces to be bonded with adhesives. Its ready-to-use formula dries residue free and is compatible with metal, glass, rubber, most plastics and painted surfaces. It will not cause flash rusting on water sensitive parts. Contains no ozone depleting compounds. Recommended as a final pre-assembly cleaning treatment for all surfaces bonded with adhesives.

Techniclean MTC 43 Machine Tool Cleaner

Techniclean MTC 43 is a medium to heavy duty machine tool cleaner and steriliser, based upon powerful low foaming surfactants, emulsifiers and antimicrobiological agents.
APPLICATION
Techniclean MTC 43 has been specifically formulated to deal with a wide variety of machine tool contaminants and is easy to use with minimum disruption to production, being added direct to the coolant system whilst still in operation.
FEATURES
Compatible with common soluble coolants and metal substrates
Keeps machine tools in a clean and efficient condition
Cleans machine tool systems of a wide range of contaminants including fatty build-up in pipelines and floor ducts
Kills bacteria and fungis
Emulsifies floating tramp oil
Low foaming properties
No further corrosion protective required
Used whilst machines are operating normally
CONDITIONS OF USE
An addition of 1 - 3% of Techniclean MTC 43 is recommended. The amount added depends on the general condition of the coolant system (1% is usually adequate)
Introduce Techniclean MTC 43 where there is a good coolant movement e.g. immediately beyond the pump outflow back to the main settling tank, or direct into a velocity trench or floor
return channel. This ensures complete mixing with the coolant.
Add Techniclean MTC 43 8 - 24 hours the day before the coolant is scheduled to be discarded. The machine tools should then be operated normally for a minimum of eight hours.
Machine tools, which are not wetted by the emulsion, could be cleaned manually by using a 2 - 3% dilution of Techniclean MTC 43.
Following this period of circulation (max 24 hours), empty the entire coolant system and machines and dispose of the coolant in accordance with normal work procedures.
Rinsing with a fresh coolant (about 1%) is recommended.

Images not available for 5kg or 219kg

WD40SP Fast Drying Degreaser

Cleans equipment to make it run smoother and last longer. Works immediately on contact. Easy to rinse and leaves no residue. Cleans away oil, grease, dirt and grime. Can be used on a variety of surfaces, including metal.

LPS® Electro Contact Cleaner

Fast drying, CFC-free, cleans and degreases delicate precision mechanisms with its fast-penetrating action to remove oil, grease, dirt, flux and other contaminants. CFC-free is safe on metal and plastic, is fast evaporating, does not leave a residue and does not contain HCFCs. NSF K2 registration 059813: (aerosol); 059814: (bulk).

Fast Drying Solvent - FE10

Powerful, fast evaporating solvent cleaner/ degreaser. Particularly suitable for use in mould cleaning during production runs. Powerful flushing action, rapidly removes grease or oils. Evaporates to leave a clean, dry surface. Safe for use on ferrous and non-ferrous metals and most plastics. Meets military specification - NATO catalogue No. 6850-99-6636478.

Janitol® Altrans

Biodegradable, acidic metal cleaner specifically formulated to remove rust, oxidation and corrosion from most metals. Will also dissolve concrete and mortar on tools and equipment.

Image not available for 25ltr

Fast Drying Solvent - FE10

Powerful, fast evaporating solvent cleaner/ degreaser. Particularly suitable for use in mould cleaning during production runs. Powerful flushing action, rapidly removes grease or oils. Evaporates to leave a clean, dry surface. Safe for use on ferrous and non-ferrous metals and most plastics. Meets military specification - NATO catalogue No. 6850-99-6636478.

Electronic Cleaner Plastic Safe

An effective formula for removing dirt and tape oxides from audio and video recording heads. Suitable for removal of carbon deposits from photocopy equipment. Effectively absorbs moisture from electronic component PCBs. Meets the following approval BS1595, ASTMD 770, DIM53245.

IPA

Electrical Contact Cleaner Spray - Trike Free

Solent Electrical Contact Cleaner is an effective solvent based cleaner packed in a large 500 ml aerosol. The product is formulated to remove oil, grease, and carbon dust from electrical switch gear and electronic components. Solent Electrical Contact Cleaner is safe on most common plastic parts, but will attack lacquer finishes and coatings. If in doubt about suitability, trial the product on a scrap sample first before general application. The product is propelled from the aerosol by CO2 Carbon Dioxide gas. CO2 is non-flammable. Electrical Switch Cleaner fluid is flammable. Always ensure power is switched off before applying this product to electrical equipment.