7063 - Cleaner

General purpose industrial cleaner for cleaning and degreasing surfaces to be bonded with adhesives. Its ready-to-use formula dries residue free and is compatible with metal, glass, rubber, most plastics and painted surfaces. It will not cause flash rusting on water sensitive parts. Contains no ozone depleting compounds. Recommended as a final pre-assembly cleaning treatment for all surfaces bonded with adhesives.

Trike-free Solvent

Formulated to replace trichloroethylene-based solvent cleaners. Rapid dry formula will remove oil, grease, tar, carbon and general soiling. Suitable for electrical part cleaning, electronic part cleaning and general degreasing work etc. CO2 propellant. 500ml.

SiteSafe® Anti-Static Foam Cleaner

FCA500
This cleaner is recommended for the everyday cleaning of electronic and electrical equipment. It removes stubborn stains, nicotine, grease and general grime build-up from plastic, formica, leatherette, ceramics, glass, paintwork or any other non-porous hard surface. Ideal for use in offices, canteens, banks, schools, kitchens, washrooms and many other problem areas. It has been formulated from surfactants and solvents which are safe to use on most surfaces. Size: 500ml aerosol.

Lec-Klene High Flash Point Solvent Degreaser

A highly refined, ultra low odour solvent cleaner which has been formulated to satisfy the exact requirements of military, aerospace and defence related industries.



High flash point degreaser - safer in use. Ideal for use in confined areas. Powerful solvent cleaner which rapidly removes oil, grease, wax, tar, bitumen, brake block dust and other general soiling. No detrimental effect on painted surfaces, ferrous and non-ferrous metals, and epoxy based composites, acrylic sheet, plastics and rubbers. Meets military and industrial specifications: DEF STAN 68-148 issue 2. ASTM F519-97 (hydrogen embrittlement). ASTM F1110 (sandwich corrosion). Controlled evaporation. Zero residue on evaporation. Virtually odourless in use. Non-conductive.

So-Clean "Plus" Multi Cleaner and Degreaser

Low surface tension and high surfactant levels, which afford the optimal degreaser detergency following metal working and heat treatment. The nature of the surfactants gives excellent separation properties and low foam tendency (even with low temperature and high pressures). So-Clean Ferrous is a "salts-free" and oil free product. For this reason surfaces cleaned with this product have minimal organic and inorganic residues. So-Clean Ferrous has passivation properties, affording good protection against corrosion (depending on water quality) even during the tempering process. Can be used in high pressure systems up to 400 bar. So-Clean Ferrous is designed to give extraordinarily long life.
Available in grade SC-MULTI.
Supplied in 20 litre stacking poly containers.

Pistol Grip Can Holder & Sprayer

For aerosol sizes 300ml/400ml/500ml cans. Protects hands from cold cans and chemical contact.

Techniclean MTC 43 Machine Tool Cleaner

Techniclean MTC 43 is a medium to heavy duty machine tool cleaner and steriliser, based upon powerful low foaming surfactants, emulsifiers and antimicrobiological agents.
APPLICATION
Techniclean MTC 43 has been specifically formulated to deal with a wide variety of machine tool contaminants and is easy to use with minimum disruption to production, being added direct to the coolant system whilst still in operation.
FEATURES
Compatible with common soluble coolants and metal substrates
Keeps machine tools in a clean and efficient condition
Cleans machine tool systems of a wide range of contaminants including fatty build-up in pipelines and floor ducts
Kills bacteria and fungis
Emulsifies floating tramp oil
Low foaming properties
No further corrosion protective required
Used whilst machines are operating normally
CONDITIONS OF USE
An addition of 1 - 3% of Techniclean MTC 43 is recommended. The amount added depends on the general condition of the coolant system (1% is usually adequate)
Introduce Techniclean MTC 43 where there is a good coolant movement e.g. immediately beyond the pump outflow back to the main settling tank, or direct into a velocity trench or floor
return channel. This ensures complete mixing with the coolant.
Add Techniclean MTC 43 8 - 24 hours the day before the coolant is scheduled to be discarded. The machine tools should then be operated normally for a minimum of eight hours.
Machine tools, which are not wetted by the emulsion, could be cleaned manually by using a 2 - 3% dilution of Techniclean MTC 43.
Following this period of circulation (max 24 hours), empty the entire coolant system and machines and dispose of the coolant in accordance with normal work procedures.
Rinsing with a fresh coolant (about 1%) is recommended.

Images not available for 5kg or 219kg

Label Remover

For self-adhesive labels and stickers. Unique, speciality product that provides the instant answer to the problem of removing old labels and unsightly label residues from a wide variety of surfaces. Fast and effective removal of self-adhesive paper labels. Quickly breaks down adhesive residues. Controlled evaporation enables time for solvent to penetrate label. Pleasant citrus smell. No need to scratch and scrape. Safe on most surfaces. Also an effective cleaner for the removal of some inks and dyes.

Ambersil Fast Clean 200 Spray

F200
Super fast degreaser. An ideal alternative to chlorinated solvents. High degreasing power. Very fast drying time. Leaves no residue. Safe on all metals. Excellent spot remover for textile trade.
Size: 400ml aerosol.

Amberklene Glass Cleaner

For cleaning glass and vitreous surfaces without film or smearing. For use on lenses, glass surfaces in photocopiers, windows, mirrors, tiles and other glazed areas.