Kennedy® Router Cutters

With ball bearing guide. For mounting slotting cutters. Complete with ball bearing guide which also ensures a constant depth of slot.

RN Classical Bits

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

Trend Router Cutters

For drilling slotting, cutting aluminum anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes.

Single Flute Helical

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Rotabroach SRC Standard Cutters

Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4" pilot bore and can be used in most magnetic drills. 700 N/mm2 material hardness. Fully ground M2 high speed steel cutters.

Kennedy® Polishing

Provides tight and compact fitting for tie-on bonnets.

Super Polyurethane Support Pad

Kennedy® Router Cutters

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Two Flute Flush Trimming Bits

09272

• 230v (13amp) supply
• Powerful 36,500 BTU/hr (10.7kW) heat output
• 245m3 (8652 cu.ft) approx. heating area
• Low 0.653kg/hr average gas consumption
• Rugged non-corrosive stainless steel casing for tough daily use
• Highly portable
• Made in Italy
• 2 Year Warranty
BADGES: Made in Italy, NEW, 2 year warranty, Stainless Steel, 13amp supply