Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Cup Brushes Twisted Knot - Threaded Bore

For fast and heavy duty cleaning. The support ring prevents excessive spreading. For removal of rust, paint and scale on large surfaces. 50 SWG

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Trend Router Cutters

For drilling slotting, cutting aluminum anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes.

Single Flute Helical

Kennedy® 12 Piece High Performance Router Cutter Set

Manufactured from high speed steel with tungsten carbide tips. Precision ground cutting edges for improved surface finish and longer tool life. Ideal for the production environment. All on a 1/4" shank.



Contents:
Two Flute Core Box Bit: 12.7mm diameter x 6.3mm radius.
Two Flute Core Bit: 22mm diameter x 6.3mm radius with ball bearing guide.
Two Flute Dovetail Bit: 12.7mm diameter x 14° side cutting angle.
Two Flute Chamfering Bit: 32mm diameter x 45° side cutting angle with ball bearing guide.
Two Flute Flush Trimming Bit: 12.7mm diameter with ball bearing guide.
Two Flute Straight Template Bit: 16mm diameter.
Two Flute Beading Bit: 22mm diameter x 6.3mm radius with ball bearing guide.
Two Flute Straight Trimming Bit: 12mm diameter.
Two Flute Straight Trimming Bit: 6mm diameter.
Two Flute Rounding Over Bit: 28.6mm diameter x 9.5mm radius with ball bearing guide.
Two Flute "V" Grooving Bit: 12.7mm diameter x 90° inclusive cutting angle.
Two Flute Roman Ogee Bit: 25.4mm diameter x 14.5mm.

Dronco Diamond Cutting Blades

Dry cutting diamond disc which is sintered and segmented designed to cut construction-site materials with a good price/performance ratio. For use on all kinds of construction site material.

ST7 Diamond Cutting Discs

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

Kennedy® Power Tool Chisels

Suitable for tools with SDS Max system.

Kennedy® Fabric Backed Lambs Wool Bonnets

Natural fabric backed wool bonnet. Ideal for use on surfaces of all colours. 20mm pile. Diameter 178mm.