Kennedy® Flexible Backing Pads

Suitable for use with all portable and air disc sanders. Recommended for use with Kennedy® abrasive discs.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Red Line - Medium

General purpose blades, with medium TPI. For cutting both long grain and cross grain solid wood, giving a good finish.

Kennedy® Router Cutters

For cutting grooves/apertures and general shaping work. Single flute for maximum support behind the cutting edge, giving strength, while providing large clearance for ease of chip flow promoting fast free cutting.

Single Flute Straight Plunging Bits

SIP Fireball Diesel Space Heaters

Diesel/paraffin heaters are ideal for heating factories, warehouses, garages and workshops. The stainless steel combustion chamber and casing eliminates rusting and the heavy-duty construction means reliable, long-term use. Unique plastic fuel tank for long life and less fuel contamination. External fuel filter means less downtime. European made with a 2 year warranty. Illustrated with optional wheel kit.

Fireball 1645S (09047)

Heat Output, kW: 48.1.
Heat Output, BTU: 164,500.
Approx Heating Area: 1154 cubic metres.
Approx Heating Area: 25,500 cubic feet.
Fuel Consumption: 3.88 Kg/hour.

Kennedy® Router Cutters

With ball bearing guide. Moulding suitable for items such as cabinets and table mantle tops.

Two Flute Roman Ogee Bits

Rotabroach Mini Cutter Accessories

To suit Rotabroach Mini Cutters. Complete with pilot and spring. Spare parts also available on request. Shank Sizes: RA117 = 10mm. RA116/RA118 = 13mm cutters supplied separately.

Arbors

Kennedy® Router Cutters

With ball bearing guide. Tool will produce an ovolo mould to window frames, sashes and glazing bars. Cabinet doors and frames, trophy plaques/plinths, shelves, etc. Self guiding with ball bearing.

Two Flute Beading Bits

Kennedy® M2 Multi-Tooth Milling Cutters

For use with all multi-tooth milling cutters with 6mm bore. Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter. Suitable for "blind" or "through" pilot holes, pin will retract into cutter adaptor on "bottoming".

Pilot Pins

Bore diameter: 20mm.
Overall length: 156mm.

Kennedy® "Ultimate" Merino Sheepskin Bonnets

Genuine 100% sheepskin tie-on bonnets ideal for polishing metal, glass fibre, wood and painted surfaces. With tie cord. 32mm pile. Maximum 2,500rpm - Best results are obtained with a tool speed of 1,500 - 2,000rpm. Not suitable for wet use. Support pad supplied separately.