Solent? Absorbent Pillows

These absorbent pillows are particularly useful for coping with persistent leaks that require more than the absorbent capacity offered by pads. Can be left in place under machinery.
Dimensions: 38 x 23cm.

Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Chemical/Light Duty
Size: 50 x 40cm
Pack Qty: 200
Absorbs (ltrs): 0.5

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

20ltr Vinyl Holdall Spill Kit

Contents:
15 x pads.
2 x socks.
3 x disposal bags.

Solent? Tough Stuff' Absorbents

Following on from the success of the Solent Plus absorbents are these all-new "ToughStuff" pads and rolls. Featuring a
unique three-layer construction, these products offer the very best of absorbent technology that is available today. Sandwiching a high loft filling of 100% polypropylene absorbent fibres there is a spun bond coverstock to the top for better wear resistance and a fine fibre coverstock to the underside for a lowlint finish that doesn't impede the speed of absorbency. Pads and rolls both utilise the same construction and are available in maintenance, oil-only or chemical grades with the same colour coding as all the other absorbents in the Solent Plus spill control range.

Chemical Roll

Pack quantity: 1.
Size: 50cm x 40m.
Absorbs: 110 litres.

XR99 Lubetech 'Highway' Micro Clay Granules - 20ltr bag

Excellent floor coverage. Conforms to AFNOR NF P 90-198, European Road Safety Regulations. Low skid risk during deployment and after clean-up. Highly absorbent calcinated mineral. Absorbs up to 14 litres. 20ltr bag

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

15ltr Clip-Closed Carrier Spill Kit

Contents:
10 x pads.
1 x sock.
1 x disposal bag.

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Maintenance/Medium Duty
Size: 50 x 40cm
Pack Qty: 100
Absorbs (ltrs): 0.8

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

120ltr 2-Wheeled Poly Bin Spill Kits

Contents:
75 x pads.
9 x socks.
8 x pillows.
10 x disposal bags.

Solent? Absorbent Booms

Use to contain oil or fuel spills on water. The fill is hydrophobic, which means that they repel water while absorbing oils and fuels. Will stay afloat on water even when saturated with oil. Use the clips and rings to join more than one boom together for larger spills. Convenient three metre length for ease of handling.