Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

SDC919P

L x W (cm): 91 x 91 Polyurethane

Solent? Absorbent Socks

Make use of socks where liquids need to be contained. Particularly useful for putting round the base of machinery and in food stores around the base of freezers (use the maintenance grade). Colour coded for ease of selection. Oil-only socks repel water and only absorb oil and fuels.

Absorbent Granules

MOP absorbent granules used to mop up oil spills on floors and other contaminated surfaces. Holds the absorbed fluid, does not disintegrate. Chemically inactive, odourless granular material.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

10ltr Vinyl Holdall Spill Kit

Contents:
10 x pads.
1 x sock.
1 x 1kg tub ?Drum Plug?.
2 x disposal bags.

Solent? Absorbent Pillows

These absorbent pillows are particularly useful for coping with persistent leaks that require more than the absorbent capacity offered by pads. Can be left in place under machinery.
Dimensions: 38 x 23cm.

Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

Solent? Tough Stuff' Absorbents

Following on from the success of the Solent Plus absorbents are these all-new "ToughStuff" pads and rolls. Featuring a
unique three-layer construction, these products offer the very best of absorbent technology that is available today. Sandwiching a high loft filling of 100% polypropylene absorbent fibres there is a spun bond coverstock to the top for better wear resistance and a fine fibre coverstock to the underside for a lowlint finish that doesn't impede the speed of absorbency. Pads and rolls both utilise the same construction and are available in maintenance, oil-only or chemical grades with the same colour coding as all the other absorbents in the Solent Plus spill control range.

Oil Only Roll

Pack quantity: 1.
Size: 50cm x 40m.
Absorbs: 110 litres.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

120ltr 2-Wheeled Poly Bin Spill Kits

Contents:
75 x pads.
9 x socks.
8 x pillows.
10 x disposal bags.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

240ltr 2-Wheeled Poly Bin Spill Kits

Contents:
200 x pads.
12 x socks.
10 x pillows.
18 x disposal bags.

Solent? Absorbent Rolls

Many applications for absorbents can be met by making use of one or more of these rolls. Make a selection from medium weight 50cm or 90cm wide, or lightweight 50cm x 80m long. All sizes and weights are perforated for economy of use.



Oil-only/Medium Duty
Size: 50cm x 40m
Absorbs (ltrs): 80