Solent? Audit Spill Cover

Spill kit audit covers are yellow, weatherproof PVC covers with elasticated cord to allow fitting over the top of a 2-wheeled wheelie bin spill kit. A4 sized clear pouch for inserting audit record sheet. Tamperproof tape fitted on the container and cover indicates whether any of the contents have been used. Depleted spill kits are classified as ISO14001 non-conformity. Available in 3 types: 120 litres, 240 litres and 360 litres.

Solent? Absorbent Rolls

Many applications for absorbents can be met by making use of one or more of these rolls. Make a selection from medium weight 50cm or 90cm wide, or lightweight 50cm x 80m long. All sizes and weights are perforated for economy of use.



Chemical/Medium Duty
Size: 50cm x 40m
Absorbs (ltrs): 80

Solent? Absorbent Booms

Use to contain oil or fuel spills on water. The fill is hydrophobic, which means that they repel water while absorbing oils and fuels. Will stay afloat on water even when saturated with oil. Use the clips and rings to join more than one boom together for larger spills. Convenient three metre length for ease of handling.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

10ltr Vinyl Holdall Spill Kit

Contents:
10 x pads.
1 x sock.
1 x 1kg tub ?Drum Plug?.
2 x disposal bags.

Solent? Absorbent Socks

Make use of socks where liquids need to be contained. Particularly useful for putting round the base of machinery and in food stores around the base of freezers (use the maintenance grade). Colour coded for ease of selection. Oil-only socks repel water and only absorb oil and fuels.

Solent? Tough Stuff' Absorbents

Following on from the success of the Solent Plus absorbents are these all-new "ToughStuff" pads and rolls. Featuring a
unique three-layer construction, these products offer the very best of absorbent technology that is available today. Sandwiching a high loft filling of 100% polypropylene absorbent fibres there is a spun bond coverstock to the top for better wear resistance and a fine fibre coverstock to the underside for a lowlint finish that doesn't impede the speed of absorbency. Pads and rolls both utilise the same construction and are available in maintenance, oil-only or chemical grades with the same colour coding as all the other absorbents in the Solent Plus spill control range.

Oil Only Pad

Pack quantity: 20.
Size: 50 x 40cm.
Absorbs: 1.1 litres.

Solent? Absorbent Socks

Make use of socks where liquids need to be contained. Particularly useful for putting round the base of machinery and in food stores around the base of freezers (use the maintenance grade). Colour coded for ease of selection. Oil-only socks repel water and only absorb oil and fuels.

Solent? 'Natural' Absorbents

Rather than relying on a non-renewable resource such as polypropylene for their construction, this all-new range of absorbent pads, rolls and socks from Solent Plus utilises raw materials that are constituted 80% cellulose fibre in their manufacture. Cellulose fibres are one of the most widely available sustainable resources and have a low-dependence on fossil fuels. All of the products are available in either maintenance or oil-only grades, and represent a viable, cost-effective alternative to traditional melt-blown absorbents. The performance is equal to, if not better in some cases than conventional absorbents. Of particular note here is the oil pad, which has a class-beating absorbency rating of up to 1.4 litres per pad.

?Natural? Rolls

'Maintenance' will absorb 62ltrs. 'Oil only' will absorb 108ltrs.

Solent? Absorbent Rolls

Many applications for absorbents can be met by making use of one or more of these rolls. Make a selection from medium weight 50cm or 90cm wide, or lightweight 50cm x 80m long. All sizes and weights are perforated for economy of use.



Maintenence/Medium Duty
Size: 90cm x 40m
Absorbs (ltrs): 144

Spilkleen Plus Granules - MGSP10

Lightweight mix of dust free non-slip cellulose and clay granulate. Does not break down or powder even in heavy traffic areas. 3 times as absorbent as conventional clay granules. Suitable for use on oils, paints, inks, dyes, solvents and non-aggressive aqueous liquids.



Oil absorbency 130%, water absorbency 16%. Lightweight mix of dust-free non-slip cellulose and clay granulate. Does not break down or powder even in heavy traffic areas. Three times as absorbent as conventional clay granules. Suitable for use on oils, paints, inks, dyes, solvents and non-aggressive aqueous liquids.