Spill Depot

The perfect way to store and dispense absorbents. Made from quality industrial polyester powder-coated steel.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

50ltr Vinyl Holdall Spill Kit

Contents:
35 x pads.
3 x socks.
3 x pillows.
5 x disposal bags.

Spill Depot

The perfect way to store and dispense absorbents. Made from quality industrial polyester powder-coated steel.

Solent? Oil Selective & Marine Absorbents

Oil selective absorbent products are capable of removing and containing oil based liquids from water. The products will float on water and only absorb the oil.Applications: For use on lakes, rivers, outfalls, ditches or separation pits, oil bunds, or where wet weather recovery of oil is anticipated.Benefits: Easy to deploy and recover, highly absorbent, will not absorb water. Floats even when oil saturated, non-toxic, non-reactive and fast-acting.Typical Liquids: Vegetable and mineral oils and all hydrocarbon derivatives.

35ltr Cube Bag Spill Kits

Contain a range of absorbent products and disposal bags for dealing effectively and quickly with spills.
Contents: Printed cube bag. 2 x socks (80mm x 3M). 15 x pads (double weight). 1 x disposal bag and tie. 1 x instruction sheet. Kit capability: 35 litres.

Solent? 'Natural' Absorbents

Rather than relying on a non-renewable resource such as polypropylene for their construction, this all-new range of absorbent pads, rolls and socks from Solent Plus utilises raw materials that are constituted 80% cellulose fibre in their manufacture. Cellulose fibres are one of the most widely available sustainable resources and have a low-dependence on fossil fuels. All of the products are available in either maintenance or oil-only grades, and represent a viable, cost-effective alternative to traditional melt-blown absorbents. The performance is equal to, if not better in some cases than conventional absorbents. Of particular note here is the oil pad, which has a class-beating absorbency rating of up to 1.4 litres per pad.

?Natural? Socks

?Maintenance? and ?Oil only? will absorb 4ltrs.

Spill Depot

The perfect way to store and dispense absorbents. Made from quality industrial polyester powder-coated steel.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

25ltr Small Poly Bin Spill Kit

Contents:
17 x pads.
1 x sock.
2 x pillows.
4 x disposal bags.

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Chemical/Medium Duty
Size: 50 x 40cm
Pack Qty: 100
Absorbs (ltrs): 0.8

Solent? Absorbent Rolls

Many applications for absorbents can be met by making use of one or more of these rolls. Make a selection from medium weight 50cm or 90cm wide, or lightweight 50cm x 80m long. All sizes and weights are perforated for economy of use.



Maintenence/Medium Duty
Size: 50cm x 40m
Absorbs (ltrs): 80

Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

SDC614

L x W (cm): 65 x 45 Clay
Pack Qty: 2