Devcon "5 Minute" Epoxy Adhesive

Clear, permanent non-shrinking bonds. Bonds metals, glass, ceramics, concrete and wood. Works down to -40C when cured. Max Operating Temperature: 93C. Pot Life: 4 minutes. Mix Ratio: 1:1.

Aluminium Putty (F)

Machinable. Resistant to rust, CFC?s and other chemicals. Bonds to other metals and thermoset plastics. Max operating temperature: 121C. Pot life: 60 minutes. Mix ratio: 9.0:1. Available in 500gm or 1kg tubs.

Size: 500gm

Epoxy Repair Mortar

Multi-use epoxy resin to repair damaged concrete floors, steps and ramps. fast setting (3 - 6 hours) to a granite hard finish. For use where fillers or normal mortars would fail. Ideal for thin screeds (5mm) on concrete, stone, steps, floors and sills. No priming necessary. Coverage: 1kg covers approximately 0.12m2 at 5mm thick.

Wet Surface Repair Putty (UW)

High-exothermic, non-rusting epoxy putty for use in wet environments and underwater. Bonds securely to steel, iron, aluminium, brass, bronze, concrete, wood and plastics. Max Operating Temperature: 93C. Pot Life: 45 minutes. Mix Ratio: 1.40:1.

Loctite Hysol 3475 A&B - Metal Set A1 - Slow Cure

Loctite Hysol 3475 A&B is an aluminium filled, 2K-Epoxy adhesive, for repairing and rebuidling worn metal parts. Ideal for repairing castings and cracks in housings and machine parts.

Typical Properties
? Mix ratio by volume: 1:1
? Mix ratio by wight: 100:100
? Working life: 45 min.
? Fixture time: 180 min.
? Colour: Grey
? Viscosity: Putty
? Shear strength (GBMS): 20 N/mm
? Compressive strength: 70 N/mm
? Operating temperature: up to 120C

Flexane Liquid

Good for abrasion/tear resistant linings. Protects against vibration, shock & wear. Cost-efficient moulds (self-levelling).



Flexane 94: Shore 94, relatively rigid. Max Operating Temperature: 82C. Pot Life: 10 minutes. Mix Ratio: 2.19:1.

Devcon Titanium Putty (HP)

Machinable. Repairs damaged equipment in hours. Resists rust, abrasion, high temperatures and chemicals. High compression strength. Max Operating Temperature: 177C. Pot Life: 21 minutes. Mix Ratio: 4.30:1. Size: 500gm.

Plastic Steel Putty (A)

Steel filler. Bonds to metals, concrete, and some plastics. Resistant to rust, oil, petrol, water and chemicals. Machinable. Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Plastic Steel Putty (A)

Steel filler. Bonds to metals, concrete, and some plastics. Resistant to rust, oil, petrol, water and chemicals. Machinable. Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Floor Patch

Bonds to new or old concrete producing a walkable surface in eight hours. Resistant to chemicals and heat up to 120C.