Devcon "5 Minute" Epoxy Adhesive

Clear, permanent non-shrinking bonds. Bonds metals, glass, ceramics, concrete and wood. Works down to -40C when cured. Max Operating Temperature: 93C. Pot Life: 4 minutes. Mix Ratio: 1:1.

Metal Set Syringe

A two-part filled epoxy resin supplied in a small hand held dual syringe giving accurate dispensing for small scale repairs.

5ltr Waterseal

Waterseal is a high performance transparent water repellent specially formulated to prevent water penetration on all mineral substrates such as brick, stone, concrete, pebbledashed and rendering. Based on the
latest technology in
silicone resins,
Waterseal does
not contain
solvents harmful
to the user or
the environment
and is
non-flammable.

Flexane Liquid

Good for abrasion/tear resistant linings. Protects against vibration, shock & wear. Cost-efficient moulds (self-levelling).



Flexane 80: Shore 80, some flexibility. Max Operating Temperature: 82C. Pot Life: 30 minutes. Mix Ratio: 3.33:1.

Epoxy Repair Mortar

Multi-use epoxy resin to repair damaged concrete floors, steps and ramps. fast setting (3 - 6 hours) to a granite hard finish. For use where fillers or normal mortars would fail. Ideal for thin screeds (5mm) on concrete, stone, steps, floors and sills. No priming necessary. Coverage: 1kg covers approximately 0.12m2 at 5mm thick.

Magic Bond

A two colour stick which seals leaks and repairs gouges in steel, aluminium, wood, fibreglass, concrete and ceramics. Works on wet surfaces, can be painted, sanded, machined, tapped or drilled and is ready for use in 1 hour.
Max Operating Temperature: 121C.
Pot life: 10 mins

Loctite 3463 Metal-filled 2-Part Epoxy

"2K Epoxy" - Sets in 10 minutes. Steel filled kneadable Stick. Adheres to damp surfaces and cures under water. Chemical and corrosion resistant. Can be drilled, filed and painted. Ideal for emergency sealing of leaks in pipes and tanks, smoothing over rough finish welds and repairing small cracks in castings

Working life: 3 min.
Fixture time: 10 min.
Shear strength (GBMS): >6 N/mm²
Compressive strength: 82,7 N/mm²
Service temperature range: -30 °C to +120 °C

660 Quickmetal

Ideal for keeping machinery running by repairing worn coaxial parts without the need for total dismantling and re-machining. Allows the re-use of worn bearing seats, key ways, splines, tapes or retaining shims. (Use with Activator 7240 or 7649)

Tooling & Production Epoxies

Devcon high performance tooling and production epoxies provide a fast and economical method of manufacturing moulds, patterns and tools. They may be machined, drilled and tapping using conventional machine tools, while their properties allow accurate and detailed reproduction when cast over existing models.

Plastic Steel Liquid

Fast-curing, self levelling for low-cost moulds and dies.Reproduces fine detail.Excellent surface finish.Machinable to close tolerances.
Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Devcon 50ml Devweld 530

Rapid curing multi-purpose toughened structural methacrylate adhesive which produces superior load bearing bonds to engineered plastics, metals, ceramics and many other difficult substrates. Minimal surface preparation. Resistant to weathering, humidity and wide variations in temperature.