Plastic Steel Putty (A)

Steel filler. Bonds to metals, concrete, and some plastics. Resistant to rust, oil, petrol, water and chemicals. Machinable. Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Devcon "5 Minute" Epoxy Adhesive

Clear, permanent non-shrinking bonds. Bonds metals, glass, ceramics, concrete and wood. Works down to -40C when cured. Max Operating Temperature: 93C. Pot Life: 4 minutes. Mix Ratio: 1:1.

Devcon Titanium Putty (HP)

Machinable. Repairs damaged equipment in hours. Resists rust, abrasion, high temperatures and chemicals. High compression strength. Max Operating Temperature: 177C. Pot Life: 21 minutes. Mix Ratio: 4.30:1. Size: 500gm.

Loctite Hysol 3473 A&B - Metal Set S3 - Fast Cure

Loctite Hysol 3473 A&B is a steel filled, 2K-Epoxy adhesive, for emergency repairing and rebuilding worn metal parts. Ideal for repairing pipes and castings as well as cracks in housings and machine parts.

Typical Properties
? Mix ratio by volume: 1:1
? Mix ratio by wight: 100:100
? Working life: 6 min.
? Fixture time: 15 min.
? Colour: Grey
? Viscosity: Putty
? Shear strength (GBMS): 20 N/mm
? Compressive strength: 60 N/mm
? Operating temperature: up to 120C

Speed Patch Pourable

Quick setting, pourable patch repairs for heavily trafficked floors. A quick and easy way to fill holes in heavily used concrete floors inside and outside. No primer is required just mix the powder with water and pour into the hole. This rapid setting concrete repair bonds to damp or dry surfaces and can be applied at thicknesses from feather edge to 100mm. Sets for foot traffic after 30 minutes and heavy traffic after 2 hours. Usage rate: 10kg covers 1m2 at 5mm thickness

Devcon 2-Ton Clear Epoxy Adhesive

Produces strong, rigid bonds on metal, ceramics, wood, concrete, glass or combinations. Fills poorly mated surfaces and cures without shrinking with good impact strength.

Speed Screed Pourable

Pourable, self smoothing material for levelling damaged or uneven concrete floors. Rapidly cures to a durable, hard wearing, anti slip, grey finish. Epoxy resin coatings can be applied when dry. Ideal for workshops, garages, factory and
warehouse floors. Usually applied 3 - 5mm thick.
Coverage: 3.7M2 per 25kg pack at 3mm thick.

Speed Patch

The special polymeric formula provides excellent bonding power on worn or cracked floors. Cures in approximately 1 hour and is suitable to repair holes 10mm and above. Suitable for the floors of storage areas, steps, ramps etc. Coverage: 10kg covers 0.5m2 at 10mm depth.

Epoxy Repair Mortar

Multi-use epoxy resin to repair damaged concrete floors, steps and ramps. fast setting (3 - 6 hours) to a granite hard finish. For use where fillers or normal mortars would fail. Ideal for thin screeds (5mm) on concrete, stone, steps, floors and sills. No priming necessary. Coverage: 1kg covers approximately 0.12m2 at 5mm thick.

Devcon 2-Ton Clear Epoxy Adhesive

Produces strong, rigid bonds on metal, ceramics, wood, concrete, glass or combinations. Fills poorly mated surfaces and cures without shrinking with good impact strength.