Molyslip 11005 Alumslip Anti-Seize 500g Tin

Copper-free Alumslip anti-seize/assembly compound is specially formulated to protect against seizure even under extreme conditions of pressure and temperature. Also a highly effective thread lubricant and protective. Temp range up to 1100°C.

Action Can Maintenance Sprays & Lubricants

AC-90 Displaces water, starts wet engines, penetrates rust, protects from corrosion, lubricates and stops squeaks. Silicone free, electrically non-conductive and can be used on or near electrical components, motor circuits etc, without affecting insulation or causing short circuits.

Available in aerosols that use no CFC?s and are ozone friendly with new CO2 Propellant, or in screw top metal cans and drums.

Does Not Contain Kerosene, Paraffin, Silicone or Naphtha. Contains up to 20% more product than comparable butane propellant products.

AC-90 Liquid Maintenance

Multi-Purpose Oil Spray

General-purpose oil spray with anti-rust additives for excellent all-round performance. Ideal for lubricating locks, hinges, bicycle chains and pedals, lawn mowers, window slides, car aerials and sewing machines. Clean formulation suitable for domestic use and industrial use. CFC-free.

Solent Maintenance Aerosols

Within the Solent Maintenance range of aerosols you'll find electrical contact rapid cleaners, foam cleaners, multi purpose oils, penetrating sprays, rust protection, flaw detectors, weld anti splatter, mould release, drive belt dressing sprays and many more.

All are formulated to stringent standards of quality, to meet the demands of the commercial user!

Maintenance Spray

Solent Maintenance SM4-500C maintenance spray is ideally suitable for:

LUBRICATING - as it is a high performance mineral oil based lubricant with PTFE.
DISPLACES WATER - To help Start damp petrol engines.
PENETRATES - To allow easy release of rusty fixings.
CLEANS & PROTECTS - Cleans metal surfaces and prevents rusting of treated parts.

It does not contain naphtha, kerosene or paraffin which are all associated with operator skin dryness, cracking or dermatitis. It is electrically non-conductive at normal ranges found in the home. Care must be taken if used on some electrical plastic components where 'crazing' may occur. Test for suitability on painted surfaces before general application. A non-flammable CO2 propellant is used that in the large 500ml can size will deliver up to 15% more product than some 'like for like' butane propelled aerosols.

Does not contain silicone.

Anti Rust Protection Spray - For Tools and Packing

Solent Green Moisture Guard is a soft thin film moisture/ corrosion protective coating. Packed in a large 500ml aerosol. The coating has a slight green colouring which clearly indicates treated areas. Ideal for longer terms moisture/corrosion protection of machined components/moulding dies and tools. Removed easily with Solent Industrial Cleaner, part number SC1-500B.

Ambersil Mould Cleaner 5L

Cleaner for Mould Tools and Dies. Quickly and easily removes oil, grease, old protective films, silicone and non-silicone based release agents. Evaporates to leave a clean, dry surface with no residues. Special formulation permits use on hot production tooling without excessive solvent loss by evaporation.
Size: 5L.

N.B. Picture illustrates 400ml aerosol.

Rustilo DWX Rust Preventatives

A powerful solvent deposited rust preventive with excellent dewatering properties. The solvent, after evaporation, leaves a soft greasy protective film. Rustilo DWX rapidly removes water from components subsequent to metal treatment processes such as electroplating processes after machining, using soluble cutting fluids or parts that have been washed. Can be applied by brushing or spraying, it's dewatering action is most effective if the articles to be protected can be immersed in a dip tank.

Features:
Forms even film.
Fingerprint suppressant.
Excellent water displacing and penetrating properties.
High stability against acidic and alkaline contaminations.
Long bath-lifetimes possible.
Economical in application.
Removal: If required protective films of Rustilo DWX 31 can be removed by using a petroleum solvent or alkaline process cleaner.

Rustilo DWX 31

Suitable for use on cylinder liners, gears, spiral springs, simple hand tools, steel rods and bars etc. The very thin residual film provides effective medium term protection against corrosion during intermediate storage or transportation. Stable film characteristics reduce run-off losses and thus increase process reliability
Protection:
Indoors - 12 months.
Outdoors - 6 months (Assumes primary protection from a tarpaulin or other cover).

Chain & Drive Spray

Ideal for all types of driving chains, bearings, conveyor systems and fast moving load-bearing parts. Can also be used as a heavy-duty lubricant or slideway lubricant.

CD-90

Action Can Maintenance Sprays & Lubricants

AC-90 Displaces water, starts wet engines, penetrates rust, protects from corrosion, lubricates and stops squeaks. Silicone free, electrically non-conductive and can be used on or near electrical components, motor circuits etc, without affecting insulation or causing short circuits.

Available in aerosols that use no CFC?s and are ozone friendly with new CO2 Propellant, or in screw top metal cans and drums.

Does Not Contain Kerosene, Paraffin, Silicone or Naphtha. Contains up to 20% more product than comparable butane propellant products.

AC-90

WD40SP Fast Release Penetrant

Withstands temperatures of -20°C to +90°C. Quickly penetrates rusted and corroded parts. Loosens seized fixings. Lubricates and prevents rust and corrosion. Highly water resistant. Very low surface tension to penetrate rust. Safe on metals, alloys, rubber, plastics and most paints. Advanced formulation works as an effective mould release agent.