LPS® Heavy-Duty Rust Inhibitor

The long term, heavy- duty corrosion inhibitor. Protects and lubricates in even the harshest environments. CFC-free, non-flammable and non-conductive with a transparent waxy film. Protects up to two years. Approved by Boeing, McDonnell Douglas, Airbus Industries and Gulfstream.
USDA approved.

LPS3

LPS® Heavy-Duty Silicone Lubricant

Meets FDA regulation for incidental food contact. Water-based, silicone-rich formula. Low odour. Ideal for rubber and plastic surfaces. Eliminates sticking, binding, and squeaking. Non-staining. Safe on most surfaces. NSF® Certified: H1 Registration # 059820 (Aerosol); # 059821 (Bulk).

LPS® LPS2 Lubricant

The strong, multi-purpose lubricant and penetrant, with added corrosion protection. A non-drying, oily film that loosens rusted and frozen parts. Gives up to 1 year protection. CFC Free. Non-flammable propellant. Non-conductive. Displaces moisture. USDA approved.

LPS® Greaseless Lubricant

The fine lubricant that penetrates, dries fast and will not attract dust or dirt. Inhibits corrosion by providing a light greaseless film. Lubricates, cleans and protects delicate mechanisms. CFC-Free. Non-flammable propellant. Non-conductive. Dissolves grease and oil. USDA approved.

LPS1

Molykote Anti-Seize 1000

Solid lubricant paste for bolted metal joints, contains no lead or nickel. Suitable for bolted joints that are subjected to high temperatures up to 650C and to corrosive impacts, and which, after assembling and the initial operation have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady coefficients of friction of the lubricant are necessary. Used successfully for cylinder head bolts, nozzle head screws of plastic injection moulding machines, bolted joints in the chemical industry and also for the tension rings in centrifuges. Can be used over a wide range of temperatures -30C to 650C. High load carrying capacity. Enables non-destructive dismantling, even after long use at high temperatures. Coefficient of friction unchanged in the area of oiled bolts, even after bolt re-tightening and loosening processes.

Molykote Anti-Seize 1000

Solid lubricant paste for bolted metal joints, contains no lead or nickel. Suitable for bolted joints that are subjected to high temperatures up to 650C and to corrosive impacts, and which, after assembling and the initial operation have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady coefficients of friction of the lubricant are necessary. Used successfully for cylinder head bolts, nozzle head screws of plastic injection moulding machines, bolted joints in the chemical industry and also for the tension rings in centrifuges. Can be used over a wide range of temperatures -30C to 650C. High load carrying capacity. Enables non-destructive dismantling, even after long use at high temperatures. Coefficient of friction unchanged in the area of oiled bolts, even after bolt re-tightening and loosening processes.

Molykote Dry film Lubricant D321R

Air curing dry lubricant. For metal/metal combinations with slow to medium fast movements and high loads. Suitable for the permanent lubrication of highly stressed sliding guides with low sliding speeds, oscillating movements or intermittent operation. Improving the running-in process and for the lubrication under high vacuum and at extreme temperatures. Used successfully for cylinder head bolts, toaster guides, car mirror adjustment mechanisms, high voltage switches.

Molykote Anti-Seize 1000

Solid lubricant paste for bolted metal joints, contains no lead or nickel. Suitable for bolted joints that are subjected to high temperatures up to 650C and to corrosive impacts, and which, after assembling and the initial operation have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady coefficients of friction of the lubricant are necessary. Used successfully for cylinder head bolts, nozzle head screws of plastic injection moulding machines, bolted joints in the chemical industry and also for the tension rings in centrifuges. Can be used over a wide range of temperatures -30C to 650C. High load carrying capacity. Enables non-destructive dismantling, even after long use at high temperatures. Coefficient of friction unchanged in the area of oiled bolts, even after bolt re-tightening and loosening processes.

Molyslip Anti-Seize Lead Free Copaslip

High and low temperature assembly compound. Formulated to protect against seizure of metal parts, even under extreme conditions of pressure and temperature. Available in 500g and 5kg quantities.

Maintenance Lubricants

High and low temperature assembly compound protects against seizure, fusion and corrosion in extreme conditions. Reduces wear and torque in areas of high friction. Prevents galling and pitting. Use to ensure easy dismantling and re-assembly of metal fittings. Can be used on all joints including nuts, bolts, battery terminals and spark plug threads. Copaslip offers protection from sub-zero temperatures to over 1100C.

Copaslip Lead Free Anti-Seize