Anti-Seize Stainless (251)

A nickel free paste providing anti-seize properties across a wide temperature range. Prevents seizure of components subjected to extremely high temperatures for long periods. Suitable for use on stainless steel, nimonic and silver coated fasteners.

Molykote Anti-Seize 1000

Solid lubricant paste for bolted metal joints, contains no lead or nickel. Suitable for bolted joints that are subjected to high temperatures up to 650C and to corrosive impacts, and which, after assembling and the initial operation have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady coefficients of friction of the lubricant are necessary. Used successfully for cylinder head bolts, nozzle head screws of plastic injection moulding machines, bolted joints in the chemical industry and also for the tension rings in centrifuges. Can be used over a wide range of temperatures -30C to 650C. High load carrying capacity. Enables non-destructive dismantling, even after long use at high temperatures. Coefficient of friction unchanged in the area of oiled bolts, even after bolt re-tightening and loosening processes.

Rapid Penetrating Spray

Rapidly penetrates into rust and corroded fittings. Allows easy release and dismantling of fittings exposed to heat and great pressure. Can be used on wet metal components, does not contain Silicone, CFC's or Chlorine. Lubricates threads during release procedure, 30% less dense than water.

Plus Gas

Formula 'A' rapidly penetrates and lubricates rusted or seized components freeing them for easy dismantling.

Plus Gas

Formula 'A' rapidly penetrates and lubricates rusted or seized components freeing them for easy dismantling.

LPS® TKX Lubricant

TKX all-purpose penetrant, lubricant and protectant. Excellent all-purpose lubricant. Displaces moisture, loosens rusted or frozen parts. Protects against corrosion. High flash point of 79°C. Does not contain chlorinated solvents or silicones. Non-conductive. Safe on most surfaces. Inverta spray valve.

Ambersil Non Silicone Mould Release Agent

The non silicone formula will not interfere with post moulding treatments such as bonding,

Seven/2 Heavy duty

Heavy duty film for the release of plastic and rubber mouldings. Operational up to 170C.

Ambersil Mould Cleaner 5L

Cleaner for Mould Tools and Dies. Quickly and easily removes oil, grease, old protective films, silicone and non-silicone based release agents. Evaporates to leave a clean, dry surface with no residues. Special formulation permits use on hot production tooling without excessive solvent loss by evaporation.
Size: 5L.

N.B. Picture illustrates 400ml aerosol.

Ambersil Non Silicone Mould Release Agent

The non silicone formula will not interfere with post moulding treatments such as bonding,

Five/2 Light duty

Dry film for release of fine detail plastic and rubber mouldings. Operational up to 150C.

Loctite Sticks

Loctite sticks won?t spill, leak or drip. Fast and easy to apply. Semi-solid formula, great for overhead use and keeps tool boxes, workbenches and hands clean.

8065 C5A Copper Anti-seize Stick - 20gm

All the benefits of C5A Copper Anti-seize but in a clean and easy to use stick form. Withstands temperatures up to 980C. For use on screws, nuts, pipes, heat exchangers etc. Can be applied to exhaust bolts, brake caliper bolts and steam valve threads.