Ambersil® Heavy-Duty Silicone Lubricant

Formerly known as Silicone Sewing Lubricant, this silicone lubricant is a highly effective anti-stick spray to speed up sewing & cutting processes. Suitable for use on sewing machines, cutting tables, aying-up areas, guillotines, cutting blades, knives, anywhere that sticking or fusing presents problems. Can also be used as a lubricant in foam converting & upholstery manufacture. Operational from -50°C to +200°C. 500ml.

Silicone Release

For integral skin and elastomeric polyurethanes. Silicone release system. Ultra fine spray pattern. Fast evaporating solvent carrier. Imparts a high gloss finish to moulded parts. Does not build up in the mould. Effective to 200°C.

Image not available for 25ltr

Corrosion Inhibitor

Anti-corrosion treatment. A clear protective coating that provides long lasting protection against rust and corrosion on internal and external metallic components.



Film will not harden or crack. Suitable for protection of ferrous metals in conditions of high humidity. Film allows for subsequent handling and resists acid finger printing. Forms a continuous homogenous film. Will not stain or mark components. Removes surface moisture on application. Suitable as anti-seize coating on bolts, hinges, fixings and moving parts. Meets MIL-PRF-16173E (Class I, Grade 2). Passes IP 178, Method B. 250 Hours minimum protection (ASTMB117) in salt spray tests.

PX-24 Industrial Strength Protective Lubricant

Formulated specifically to meet the exacting standards of Military maintenance personnel. PX24 is a multi-purpose lubricant, corrosion inhibitor, dewatering and protective fluid. It is ideal for use on all mechanical and electrical equipment and as a penetrant will quickly free seized nuts, bolts and bearings.



Meets military spec Def. Stan 68-10 issue 4 PX24, NATO Code C-634 and Augusta Westland approved: WHPS 158. Copper corrosion - IP 154 max 1; no pitting or etching. Water Displacement - Complete Displacement of NaCI test solution (IP 178). Corrosion Protection - Pass/No Corrosion (IP 178). No adverse effects on rubber, paintwork or plastics and acrylic sheet polyester, glass fibre laminate, vinyl sheet and ebonite after immersion for 240 hours. Wide operational temperature range.

Ambersil Dry Film Anti-Stick Spray

A clear protective coating that provides long lasting protection against rust and corrosion on internal and external metallic components.

Film will not harden or crack.
Suitable for protection of ferrous metals in conditions of high humidity.
Film allows for subsequent handling and resists acid finger printing.
Forms a continuous homogenous film.
Will not stain or mark components.
Removes surface moisture on application.
Suitable as anti-seize coating on bolts, hinges, fixings and moving parts.

Greaseless Lubricant

Multi-purpose lubricant that prevents electrical and electronic failures caused by water penetration, humidity, condensation or rust.
Size: 400ml.

PX-24 Industrial Strength Protective Lubricant

Formulated specifically to meet the exacting standards of Military maintenance personnel. PX24 is a multi-purpose lubricant, corrosion inhibitor, dewatering and protective fluid. It is ideal for use on all mechanical and electrical equipment and as a penetrant will quickly free seized nuts, bolts and bearings.



Meets military spec Def. Stan 68-10 issue 4 PX24, NATO Code C-634 and Augusta Westland approved: WHPS 158. Copper corrosion - IP 154 max 1; no pitting or etching. Water Displacement - Complete Displacement of NaCI test solution (IP 178). Corrosion Protection - Pass/No Corrosion (IP 178). No adverse effects on rubber, paintwork or plastics and acrylic sheet polyester, glass fibre laminate, vinyl sheet and ebonite after immersion for 240 hours. Wide operational temperature range.

Ambersil White Spray Grease

Safe on metals, alloys and most paints, rubbers and plastics.
Resists water wash-off.
Protects against corrosion.

40 Protective Lubricant

Suitable for protection against corrosion, water displacement, lubrication and flash rust removal.
* Quickly frees seized nuts, bolts and bearings
* High corrosion protection and water displacement properties - Passes IP 178, Methods A and B
* Remains operational at sub-zero temperatures
* Non conductive film
* Safe on most paints, rubbers and plastics
* Rolls Royce Approved 1036J
*Treated metals resist finger printing and remain bright even in highly corrosive conditions.

Corrosion Inhibitor

Anti-corrosion treatment. A clear protective coating that provides long lasting protection against rust and corrosion on internal and external metallic components.



Film will not harden or crack. Suitable for protection of ferrous metals in conditions of high humidity. Film allows for subsequent handling and resists acid finger printing. Forms a continuous homogenous film. Will not stain or mark components. Removes surface moisture on application. Suitable as anti-seize coating on bolts, hinges, fixings and moving parts. Meets MIL-PRF-16173E (Class I, Grade 2). Passes IP 178, Method B. 250 Hours minimum protection (ASTMB117) in salt spray tests.