WD40SP High Performance Silicone Lubricant

Withstands temperatures of -35°C to +200°C. Excellent lubrication on plastics, rubber, wood and metal. Formulated for improved high pressure performance. Waterproofs and protects against moisture. Prevents rust and corrosion. Eliminates sticking.

Easy Start

Ensures firing even under arctic conditions. Starts ALL engines. Can be used on diesel, petrol and paraffin engines.

Molykote Dry film Lubricant D321R

Air curing dry lubricant. For metal/metal combinations with slow to medium fast movements and high loads. Suitable for the permanent lubrication of highly stressed sliding guides with low sliding speeds, oscillating movements or intermittent operation. Improving the running-in process and for the lubrication under high vacuum and at extreme temperatures. Used successfully for cylinder head bolts, toaster guides, car mirror adjustment mechanisms, high voltage switches.

SiteSafe® Leak Detector Spray

LDA500
This product is ideal for checking for even the most minute leaks in any gas or air pressurised systems including commercial vehicle air brakes and pressure vessels. It contains no alcohols or solvents, is not caustic and contains a rust inhibitor. Shake the can well then spray directly onto the suspect area using the extension tube and examine for bubbling which will indicate leakage. Size: 500ml aerosol.

Molykote Anti-Seize 1000

Solid lubricant paste for bolted metal joints, contains no lead or nickel. Suitable for bolted joints that are subjected to high temperatures up to 650C and to corrosive impacts, and which, after assembling and the initial operation have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady coefficients of friction of the lubricant are necessary. Used successfully for cylinder head bolts, nozzle head screws of plastic injection moulding machines, bolted joints in the chemical industry and also for the tension rings in centrifuges. Can be used over a wide range of temperatures -30C to 650C. High load carrying capacity. Enables non-destructive dismantling, even after long use at high temperatures. Coefficient of friction unchanged in the area of oiled bolts, even after bolt re-tightening and loosening processes.

Anti-Seize Compound

Smooth copper containing paste prevents corrosive seizure of screw threads and eases assembly and dismantling of components. Protects against dirt, moisture and chemicals. High temperature performance 1100C.

Open Gear Spray with Molybdenum

Solent Tufgear Lubricant is a premium extreme pressure lubricant packed in a 500 ml aerosol. Based on Molybdenum Disulphide anti-wear additives. Suitable for lubricating all open gears where a thin film is specified. Suitable for temperatures as low as -40C to 100C.

"Leak Detector" Spray and Fluid

Detects even the smallest leak of potentially dangerous gases. For use on all metals and most plastics.

Never-Seez -Anti-Seize & Lubricating Compound

Protects metal parts against seizure, rust and fretting under extreme conditions of heat, -180C to 120C, pressure and corrosive environments.

Pure Nickel Special

A special grade compound for extremely high temperatures and extreme pressure. Recommended for use where applications prohibit the pressure of copper especially where resistance to acidic and caustic solutions is required.

Ambersil Silicone Mould Release Agents

Easy and economical to use, enhances surface finishes on mouldings and increases output by reducing rejects. Operational up to 200C.

One/2 Heavy duty

For difficult mouldings.