Copper Spray Grease

Thick copper spray grease, perfect for anti-seize lubrication of screw threads, brake pins, studs and all types of fixings. Effective to 1100C. Lead free. Waterproof. CFC-free.

CS90

Corrosion Inhibitor

Anti-corrosion treatment. A clear protective coating that provides long lasting protection against rust and corrosion on internal and external metallic components.



Film will not harden or crack. Suitable for protection of ferrous metals in conditions of high humidity. Film allows for subsequent handling and resists acid finger printing. Forms a continuous homogenous film. Will not stain or mark components. Removes surface moisture on application. Suitable as anti-seize coating on bolts, hinges, fixings and moving parts. Meets MIL-PRF-16173E (Class I, Grade 2). Passes IP 178, Method B. 250 Hours minimum protection (ASTMB117) in salt spray tests.

WD-40 Maintenance Liquid

Penetrates and lubricates moving parts, hinges, castors etc. Drives out moisture on metal parts. Cleans and protects, dissolves grease, tar and adhesives. Also loosens rusted parts and frees sticky mechanisms.
Contains Petroleum Naphtha: May cause drying of skin and/or irritation.

WD-40

LPS® Greaseless Lubricant

The fine lubricant that penetrates, dries fast and will not attract dust or dirt. Inhibits corrosion by providing a light greaseless film. Lubricates, cleans and protects delicate mechanisms. CFC-Free. Non-flammable propellant. Non-conductive. Dissolves grease and oil. USDA approved.

LPS1

SiteSafe® Chain & Drive Spray

CCA500
This product is a special blend of quality oils, greases and solvents, designed to lubricate and protect all types of cables and slow moving chains. It penetrates quickly into the centre of cables providing excellent protection to the core. It will not sling off, drip or dry out even in adverse conditions. It will also penetrate chain rollers and links enabling smoother working and reduce friction, wear and the possibility of seizure.

Ambersil Chain Spray

Chain and drive, heat dissipating lubricant, specifically developed for chain lubrication in conjunction with the manufacturers of the fork lift trucks. Offers maximum adhesion to chain links. Resists water wash off' and dust absorption and can be applied to running chains. High temperature resistance up to 300C. Meets military specifications - Def. Stan D/DQA/TS/CS/217/1. Pencil jet spray pattern to facilitate accurate application.
Size: 400ml.

WD-40 Maintenance Liquid

Penetrates and lubricates moving parts, hinges, castors etc. Drives out moisture on metal parts. Cleans and protects, dissolves grease, tar and adhesives. Also loosens rusted parts and frees sticky mechanisms.
Contains Petroleum Naphtha: May cause drying of skin and/or irritation.

WD-40

Leak Detector Spray

A specially formulated, high performance, white fluid, designed specifically to identify even the smallest gaseous leak. Applies a thin uniform film of surface active agents which accurately identify any leak or bleeding of joints, bubbles in the applied film indicate the location of the leak. Aerosol enables fast and easy application. Convenient and accurate in difficult to reach areas. No wastage or spillage. Propelled by compressed air - will not give a false reading if mechanical sensing equipment is used. Long shelf life, unlike other CO2 propelled leak detector sprays, the pressure will not not drop off due to CO2 degradation during storage. Suitable for use with most common industrial gases including compressed air, acetylene, butane, propane, chlorine, hydrogen, and natural gas. Not recommended for use on medical equipment where there could be a risk of ingress into the patient airway. Supplied in a 400ml aerosol.

LPS® LPS2 Lubricant

The strong, multi-purpose lubricant and penetrant, with added corrosion protection. A non-drying, oily film that loosens rusted and frozen parts. Gives up to 1 year protection. CFC Free. Non-flammable propellant. Non-conductive. Displaces moisture. USDA approved.

Ambersil Silicone Mould Release Agents

Easy and economical to use, enhances surface finishes on mouldings and increases output by reducing rejects. Operational up to 200C.

One/2 Heavy duty

For difficult mouldings.